GMCforum: GMCnet » 3000 RPMs at 70- a little much, 3.7 final drive ?

Home » Public Forums » GMCnet » 3000 RPMs at 70- a little much, 3.7 final drive ?

Show: Today's Messages :: Polls :: Message Navigator

3000 RPMs at 70- a little much, 3.7 final drive ? [message #360333]

Sat, 28 November 2020 14:25

hertfordnc

Messages: 1164
Registered: September 2009
Location: East NC

Karma:

Senior Member

The final drive had been upgraded but he PO was not sure to what.

FInally got enough things right for a short high speed run- 70MP by GPS app was about 3100 on the tach (and the speedo was reading a little low)

So that comes to 3.7 with 225/75 tires

That seems a bit excessive.

I'm thinking for a 23 footer not towing anything heavy 3.21 or 3.55 might be a better option.

A lot of my travel involves I95 in the South, lots of flat cruising.

What's the point of having a 70's muscle car if you can't enjoy 70's freeway cruising?

Dave & Ellen Silva Hertford, NC 76 Birchaven, 1-ton and other stuff Currently planning the Great american Road Trip Summer 2021 It's gonna take a lot of Adderall to get this thing right.

[Updated on: Sat, 28 November 2020 14:26]

Report message to a moderator

[Message index]

		3000 RPMs at 70- a little much, 3.7 final drive ? By: hertfordnc on Sat, 28 November 2020 14:25
		Re: 3000 RPMs at 70- a little much, 3.7 final drive ? By: Scott Nutter on Sat, 28 November 2020 14:31
		Re: 3000 RPMs at 70- a little much, 3.7 final drive ? By: lqqkatjon on Sat, 28 November 2020 14:48
		Re: [GMCnet] 3000 RPMs at 70- a little much, 3.7 final drive ? By: Randy Hecht on Sat, 28 November 2020 14:33
		Re: [GMCnet] 3000 RPMs at 70- a little much, 3.7 final drive ? By: Mike Kelley on Sun, 29 November 2020 19:39
		Re: 3000 RPMs at 70- a little much, 3.7 final drive ? By: jhbridges on Sat, 28 November 2020 17:23
		Re: 3000 RPMs at 70- a little much, 3.7 final drive ? By: Tilerpep on Sun, 29 November 2020 09:46
		Re: [GMCnet] 3000 RPMs at 70- a little much, 3.7 final drive ? By: Rob on Sun, 29 November 2020 10:17
		Re: 3000 RPMs at 70- a little much, 3.7 final drive ? By: hertfordnc on Sun, 29 November 2020 11:20
		Re: 3000 RPMs at 70- a little much, 3.7 final drive ? By: Tilerpep on Sun, 29 November 2020 10:36
		Re: [GMCnet] 3000 RPMs at 70- a little much, 3.7 final drive ? By: Dave Stragand on Sun, 29 November 2020 11:27
		Re: [GMCnet] 3000 RPMs at 70- a little much, 3.7 final drive ? By: jimk on Sun, 29 November 2020 18:23
		Re: [GMCnet] 3000 RPMs at 70- a little much, 3.7 final drive ? By: hertfordnc on Sun, 29 November 2020 19:35
		Re: [GMCnet] 3000 RPMs at 70- a little much, 3.7 final drive ? By: James Hupy on Sun, 29 November 2020 19:52
		Re: [GMCnet] 3000 RPMs at 70- a little much, 3.7 final drive ? By: hertfordnc on Sun, 29 November 2020 20:16
		Re: [GMCnet] 3000 RPMs at 70- a little much, 3.7 final drive ? By: James Hupy on Sun, 29 November 2020 20:47
		Re: [GMCnet] 3000 RPMs at 70- a little much, 3.7 final drive ? By: jimk on Sun, 29 November 2020 22:07
		Re: 3000 RPMs at 70- a little much, 3.7 final drive ? By: hertfordnc on Mon, 30 November 2020 06:26
		Re: [GMCnet] 3000 RPMs at 70- a little much, 3.7 final drive ? By: Ray Erspamer on Mon, 30 November 2020 08:24
		Re: [GMCnet] 3000 RPMs at 70- a little much, 3.7 final drive ? By: jimk on Mon, 30 November 2020 15:30
		Re: 3000 RPMs at 70- a little much, 3.7 final drive ? By: jhbridges on Mon, 30 November 2020 07:29
		Re: 3000 RPMs at 70- a little much, 3.7 final drive ? By: jhbridges on Mon, 30 November 2020 18:39
		Re: [GMCnet] 3000 RPMs at 70- a little much, 3.7 final drive ? By: jimk on Mon, 30 November 2020 22:41

Previous Topic:	Latest wisdom on the OEM compressor?
Next Topic:	[GMCnet] Final Drives

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Sep 19 07:40:38 CDT 2024

Total time taken to generate the page: 0.00909 seconds