GMCforum: GMCnet » DIY Hub-centric rings for aluminum wheels from PVC pipe

Home » Public Forums » GMCnet » DIY Hub-centric rings for aluminum wheels from PVC pipe

Show: Today's Messages :: Polls :: Message Navigator

DIY Hub-centric rings for aluminum wheels from PVC pipe [message #359960]

Tue, 03 November 2020 18:46

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma:

Senior Member

I had posted recently about making hub-centric rings from PVC pipe.

I've posted some photos of my endeavor.

http://www.gmcmhphotos.com/photos/g7337-hub-spacers-from-pvc-pipe.html

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

[Message index]

DIY Hub-centric rings for aluminum wheels from PVC pipe

By: RF_Burns on Tue, 03 November 2020 18:46

Previous Topic:	zerk drilling jig ?
Next Topic:	ALL ELECTRIC GMC MOTORHOME

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 09 09:51:40 CST 2024

Total time taken to generate the page: 0.01038 seconds