[GMCnet] Fresh Water Tank Level Sensor [message #359503] |
Fri, 16 October 2020 10:04 |
Randy Hecht
Messages: 93 Registered: March 2019 Location: Roswell, GA
Karma: -5
|
Member |
|
|
I had to replace my fresh water tank due to a “large collection” of cracks in multiple places. I put in an after market 33 gallon tank (www.classacustoms.com, mode T-3300) which fits nice and tight. The difference for the water level sensor is that it either has 4 small sensors added to one end or a top mounted float.
I would like recommendations on which would be a good level sensor to use with the current gauge or which sensor and gauge to use to completely replace the stock system.
Right now, I am using the old fashion visual system of lift the lid and look to see how much water is there.
Chaplain Randy Hecht
Roswell, GA
Chaplains are ready to Listen when you're ready to talk.
1974 Canyon Lakes GMC the Unicorn Express
80mm Front Disc Brakes
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
Re: [GMCnet] Fresh Water Tank Level Sensor [message #359516 is a reply to message #359503] |
Fri, 16 October 2020 23:15 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Go to our web site as you will have few selection .
There is one Jim Bounds prefer to use with the one you have on your tank.
It is the Monitor Panel.
We use a black plastic to over lap the original opening and mount the panel
on it.
On Fri, Oct 16, 2020 at 8:04 AM Randy Hecht via Gmclist <
gmclist@list.gmcnet.org> wrote:
> I had to replace my fresh water tank due to a “large collection” of cracks
> in multiple places. I put in an after market 33 gallon tank (
> www.classacustoms.com, mode T-3300) which fits nice and tight. The
> difference for the water level sensor is that it either has 4 small sensors
> added to one end or a top mounted float.
> I would like recommendations on which would be a good level sensor to use
> with the current gauge or which sensor and gauge to use to completely
> replace the stock system.
>
> Right now, I am using the old fashion visual system of lift the lid and
> look to see how much water is there.
>
>
> Chaplain Randy Hecht
> Roswell, GA
> Chaplains are ready to Listen when you're ready to talk.
>
> 1974 Canyon Lakes GMC the Unicorn Express
> 80mm Front Disc Brakes
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
Re: [GMCnet] Fresh Water Tank Level Sensor [message #359531 is a reply to message #359524] |
Sat, 17 October 2020 18:39 |
JohnS
Messages: 126 Registered: December 2014 Location: Vacaville, CA
Karma: -2
|
Senior Member |
|
|
Finally, a good way to gauge the aluminum holding tanks in the Stretch. Most of the others won't work, & I have been reluctant to cut a hole and put in a float. We have been going on the "If we are low on water it is time to Dump" gauge. Thanks for the link.
JohnS
John Shutzbaugh, Vacaville, CA, ncserv@aol.com;
78 Buskirk stretch, "What were we thinking?"
|
|
|
|
|
|
|