GMCforum: GMCnet » Onan 6 NH Choke problem

Home » Public Forums » GMCnet » Onan 6 NH Choke problem

Show: Today's Messages :: Polls :: Message Navigator

Onan 6 NH Choke problem [message #359479]

Thu, 15 October 2020 11:52

Matt Colie

Messages: 8547
Registered: March 2007
Location: S.E. Michigan

Karma:

Senior Member

Because I am kind of a sucker.... I have the 6.0 Onan (NH) in my barn. I have a friend that wanted it out, and another friend that wanted it. It hasn't been started in more than four years. "But it ran then"!

I was getting set to run test it and I noticed that the lever on the choke operator was not moving. Well, it isn't sticky. It is seized. I didn't try any more. Does any one have a success story that starts about here?
That or a replacement part that could be available?

If I hear none, I will attempt to deal with this and report regardless of the outcome.

Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

[Message index]

		Onan 6 NH Choke problem By: Matt Colie on Thu, 15 October 2020 11:52
		Re: Onan 6 NH Choke problem By: lqqkatjon on Thu, 15 October 2020 12:44
		Re: Onan 6 NH Choke problem By: JohnL455 on Thu, 15 October 2020 13:45
		Re: Onan 6 NH Choke problem By: Ken Burton on Thu, 15 October 2020 14:50

Previous Topic:	[GMCnet] Onan 4000 sparkplugs
Next Topic:	Jack Hook Question

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Nov 10 08:42:31 CST 2024

Total time taken to generate the page: 0.01124 seconds