| Onan 6 NH Choke problem [message #359479] |
Thu, 15 October 2020 11:52  |
 |
Matt Colie
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
|
Senior Member |
|
|
Because I am kind of a sucker.... I have the 6.0 Onan (NH) in my barn. I have a friend that wanted it out, and another friend that wanted it. It hasn't been started in more than four years. "But it ran then"!
I was getting set to run test it and I noticed that the lever on the choke operator was not moving. Well, it isn't sticky. It is seized. I didn't try any more. Does any one have a success story that starts about here?
That or a replacement part that could be available?
If I hear none, I will attempt to deal with this and report regardless of the outcome.
Matt
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|
|
| Re: Onan 6 NH Choke problem [message #359480 is a reply to message #359479] |
Thu, 15 October 2020 12:44  |
lqqkatjon
Messages: 2324
Registered: October 2010
Location: St. Cloud, MN
Karma: 5
|
Senior Member |
|
|
Matt,
reach out to Jim Miller. I think he came up with a solution for the way too expensive and rare onan choke. I think he mentioned that last time I talked to him.
Jon Roche
75 palm beach
EBL EFI, manny headers, Micro Level, rebuilt most of coach now.
St. Cloud, MN
http://lqqkatjon.blogspot.com/
|
|
|
|
|
|
| Re: Onan 6 NH Choke problem [message #359484 is a reply to message #359479] |
Thu, 15 October 2020 14:50 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
If you are going to remove it, then put it is a can and soak the whole thing in ATF or PSF and Acetone 50/50 for a couple of days.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
