Mine looks like 12.5” upper and 7” lower, measured along the body not the awning tube.


> On Sep 28, 2020, at 8:21 AM, 6cuda6--- via Gmclist wrote:
>
> Hi folks....could i trouble someone with a Zip Dee awning to do a couple quick measurements for me? Nothing to take apart just a measuring tape and
> from the side....doesn't have to be super accurate just need some numbers to start with.....thanks
>
> see link for pic of what i need.... http://www.gmcmhphotos.com/photos/exterior/p67642-awning-arms-measurement.html
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org


_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

I can help you, but need clarification .
Call me 800-752-7502
We have all the data and have ones installed as we are a Major Zip Dee
dealer.

On Mon, Sep 28, 2020 at 7:22 AM 6cuda6--- via Gmclist <
gmclist@list.gmcnet.org> wrote:

> Hi folks....could i trouble someone with a Zip Dee awning to do a couple
> quick measurements for me? Nothing to take apart just a measuring tape and
> from the side....doesn't have to be super accurate just need some numbers
> to start with.....thanks
>
> see link for pic of what i need....
> http://www.gmcmhphotos.com/photos/exterior/p67642-awning-arms-measurement.html
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>


--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

I have lot of people call me and find time to talk to ALL.
What makes you think I do not like to help people???

On Mon, Sep 28, 2020 at 8:39 AM 6cuda6--- via Gmclist <
gmclist@list.gmcnet.org> wrote:

> Jim....i hate calling you buddy but this time i better....i left you a
> voice mail.
>
>
> jimk wrote on Mon, 28 September 2020 10:59
>> I can help you, but need clarification .
>> Call me 800-752-7502
>> We have all the data and have ones installed as we are a Major Zip Dee
>> dealer.
>>
>> On Mon, Sep 28, 2020 at 7:22 AM 6cuda6--- via Gmclist > gmclist@list.gmcnet.org> wrote:
>>
>>> Hi folks....could i trouble someone with a Zip Dee awning to do a
> couple
>>> quick measurements for me? Nothing to take apart just a measuring
> tape and
>>> from the side....doesn't have to be super accurate just need some
> numbers
>>> to start with.....thanks
>>>
>>> see link for pic of what i need....
>>>
> http://www.gmcmhphotos.com/photos/exterior/p67642-awning-arms-measurement.html
>>> --
>>> Rich Mondor,
>>>
>>> Brockville, ON
>>>
>>> 77 Hughes 2600
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>>
>>
>> --
>> Jim Kanomata
>> Applied/GMC, Newark,CA
>> jimk@appliedairfilters.com
>> http://www.gmcrvparts.com
>> 1-800-752-7502
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>


--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Yes, on upper, base of end piece casting (where square tube enters) to where square tube enters larger square tube. On lower, where tube enters larger tube to hinge pin on body casting. I measured in a straight line with the tape against the body for both. If you want the measurement along the centreline of the tube, I can do that also…

Neil Roach
1977 Kingsley 26’
Mostly Stock
Calgary, Alberta, Canada


> On Sep 28, 2020, at 9:34 AM, 6cuda6--- via Gmclist wrote:
>
> Thanks for this...so just to be clear you went from the upper bracket are to the approx upper tube junction and the from the lower bracket to the tube
> but on the body correct? did you contour the measuring tape or just lay it straight on there?
>
> Neil Roach wrote on Mon, 28 September 2020 10:55
>> Mine looks like 12.5” upper and 7” lower, measured along the body not the awning tube.
>>
>>
>>> On Sep 28, 2020, at 8:21 AM, 6cuda6--- via Gmclist wrote:
>>>
>>> Hi folks....could i trouble someone with a Zip Dee awning to do a couple quick measurements for me? Nothing to take apart just a measuring
>>> tape and
>>> from the side....doesn't have to be super accurate just need some numbers to start with.....thanks
>>>
>>> see link for pic of what i need.... http://www.gmcmhphotos.com/photos/exterior/p67642-awning-arms-measurement.html
>>> --
>>> Rich Mondor,
>>>
>>> Brockville, ON
>>>
>>> 77 Hughes 2600
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org