GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » "Manufacturer's Plate" for export
"Manufacturer's Plate" for export [message #357379] Fri, 31 July 2020 17:05 Go to previous message
Deb is currently offline  Deb   Canada
Messages: 349
Registered: October 2016
Location: Logan Lake, BC
Karma:
Senior Member
Hi folks. As has been mentioned, I have found a new home for my coach, and the customs documentation (going to the US from Canada) asks for a manufacturer's plate, usually located inside the driver's door Laughing Of course, the only thing that I can find is the VIN plate under the passenger side lid. Specifically they will be looking for month and year of manufacture on that plate.

Now I know we can decipher that information from the VIN. Is there some other location on the coach that it might also be? If you say "sticker inside/behind the glove box" then that is a no go, since any sticker that used to be there is long gone. Would it be acceptable (do you think) to use the VIN and a copy of interpreting the GMC VIN?

Thx.

Deb McWade Logan Lake, BC, CAN GMC Alumnus It's Bigger on the Inside!

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Re: [GMCnet] Excel Substitute
Next Topic: Macerator pump configuration
Goto Forum:
  


Current Time: Fri Sep 20 12:41:48 CDT 2024

Total time taken to generate the page: 0.00789 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software