| Aqua Magic III (again) [message #356413] |
Sat, 04 July 2020 16:04  |
LNelson
Messages: 335
Registered: December 2008
Location: Springfield, MO
Karma:
|
Senior Member |
|
|
I am guessing I am not going to find a replacement (flush) knob assembly for my Thedford Aqua Magic III. This toilet works great but no luck with finding a replacement knob, which has a fractured collar that fits over the shaft. So I am now pondering replacements. This thing fits on a Thedford base. I am assuming that the toilet itself is bolted to a raised closet flange that lives INSIDE that raised base. Yes I can find all this out by pulling the toilet and seeing what I have inside that base. I don't want to order a new toilet that might be too tall. I see Thedford sells the Aqua Magic V in high and shorter versions. But I don't know that either will mate up with this base. Anyway, I am assuming that someone has lived thru this. I know it is not much of a job but I don't want to pull the toilet without having the replacement at hand. If we chose the go camping, we can still use this toilet with a pair of needle nose vise grips doing the job of that flush control knob. Thanks.
Larry Nelson Springfield, MO
Ex GMC'er, then GM Busnut
now '77 Eleganza ARS WB0JOT
[Updated on: Sat, 04 July 2020 16:04] Report message to a moderator |
|
|
|
GMCforum
Search
Help
Register
Login
Home
