Middle age spread [message #355884] |
Fri, 19 June 2020 12:42 |
tgeiger
Messages: 518 Registered: February 2006 Location: kansas city
Karma: -1
|
Senior Member |
|
|
Whoo, got a couple of 4x4 and a come along between the kitchen window and entry door. Crank it down pretty tight, kinda worried something will snap.
It has moved it in some but not all the way. Any suggestions guys? Is this a gradual step by step re-correction of the door jamb shape?
Thanks
Tom
Tom Geiger
76 Eleganza II
KCMO
|
|
|
|
Re: Middle age spread [message #355888 is a reply to message #355884] |
Fri, 19 June 2020 17:00 |
tgeiger
Messages: 518 Registered: February 2006 Location: kansas city
Karma: -1
|
Senior Member |
|
|
Yep, have read thru Emery’s write up on it. I just am not seeing alot of movement of the frame to close the gap yet. Just wondered if anyone had any pointer on the squeezing part? The setup I have follows Emery’s directions. Got the come along ratcheted down pretty tight now. Is it a leave for a day and come back and click a couple more teeth, then leave for another day and click a couple more??
Thanks,
TG
Tom Geiger
76 Eleganza II
KCMO
|
|
|
|
Re: Middle age spread [message #355890 is a reply to message #355884] |
Fri, 19 June 2020 19:00 |
tgeiger
Messages: 518 Registered: February 2006 Location: kansas city
Karma: -1
|
Senior Member |
|
|
Thank Emery, appreciate you responding. I’ll keep ratcheting the come along till I get the gap closed.
TG
Tom Geiger
76 Eleganza II
KCMO
|
|
|