GMCforum: GMCnet » Installing a new Macerator

Home » Public Forums » GMCnet » Installing a new Macerator

Show: Today's Messages :: Polls :: Message Navigator

Installing a new Macerator [message #355857]

Thu, 18 June 2020 12:34

Russell K.

Messages: 178
Registered: October 2016
Location: Dunedin, Florida

Karma:

Senior Member

Our old 1997 Macerator has crapped out, and I'm putting a new one in on Saturday. The new one is a similar JABSCO model 18590, just like the one its replacing, so I should not have to rearrange any plumbing. My intent is to flush the black tank with the gravity hose while the rear of the coach is squatted down low, and then, back the rear of the coach onto the ramps so that the coach is nose down to remove and replace the macerator. I hope this plan works to reduce the messiness of this project. Anyone have any tips or tricks for this operation?

1978 Eleganza II, Dunedin, Florida

Report message to a moderator

[Message index]

		Installing a new Macerator By: Russell K. on Thu, 18 June 2020 12:34
		Re: Installing a new Macerator By: Deb on Thu, 18 June 2020 13:02
		Re: Installing a new Macerator By: Russell K. on Thu, 18 June 2020 13:54
		Re: Installing a new Macerator By: Larry on Thu, 18 June 2020 14:03
		Re: Installing a new Macerator By: Russell K. on Thu, 18 June 2020 14:52
		Re: [GMCnet] Installing a new Macerator By: Emery Stora on Thu, 18 June 2020 17:01
		Re: [GMCnet] Installing a new Macerator By: Russell K. on Fri, 19 June 2020 14:36
		Re: [GMCnet] Installing a new Macerator By: Emery Stora on Thu, 18 June 2020 17:02

Previous Topic:	Grote LED clearance light installation
Next Topic:	Middle age spread

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 20 15:24:13 CDT 2024

Total time taken to generate the page: 0.00885 seconds