| Hub nut [message #355835] |
Wed, 17 June 2020 21:06  |
6cuda6
Messages: 975
Registered: June 2019
Karma: -6
|
Senior Member |
|
|
I just want to confirm, before i drive 1.5hr to my tool box in storage that the axle nut needs a 1.5 inch or 38mm socket to fit it.....is this correct?
Rich Mondor,
Brockville, ON
77 Hughes 2600
|
|
|
|
| Re: Hub nut [message #355836 is a reply to message #355835] |
Wed, 17 June 2020 21:12  |
C Boyd
Messages: 2629
Registered: April 2006
Karma: 18
|
Senior Member |
|
|
Yes Sir.
quote title=6cuda6 wrote on Wed, 17 June 2020 22:06]I just want to confirm, before i drive 1.5hr to my tool box in storage that the axle nut needs a 1.5 inch or 38mm socket to fit it.....is this correct?[/quote]
C. Boyd
76 Crestmont
East Tennessee
|
|
|
|
| Re: Hub nut [message #355847 is a reply to message #355836] |
Thu, 18 June 2020 09:29 |
6cuda6
Messages: 975
Registered: June 2019
Karma: -6
|
Senior Member |
|
|
Thank you Sir
C Boyd wrote on Wed, 17 June 2020 22:12Yes Sir.
quote title=6cuda6 wrote on Wed, 17 June 2020 22:06]I just want to confirm, before i drive 1.5hr to my tool box in storage that the axle nut needs a 1.5 inch or 38mm socket to fit it.....is this correct?
[/quote]
Rich Mondor,
Brockville, ON
77 Hughes 2600
|
|
|
|
| Re: Hub nut [message #355849 is a reply to message #355847] |
Thu, 18 June 2020 11:01 |
C Boyd
Messages: 2629
Registered: April 2006
Karma: 18
|
Senior Member |
|
|
You are welcome. The only exception I have ever seen is a new CV that was on a rebuilt axel for a Tornado from Advance Auto. 10 years or so ago I ordered 10 sets when we were first starting to have trouble with the wrong spline count and I wanted to get some spares while I could. Out of the 10 axels I could only use 3, the rest were returned with wrong spline count and a round inner joint. One in the bunch had a 1 1/4” nut and was new, not rebuilt. GM-812 was on the joint. Inner split ring was a real bear to unlock.
http://www.gmcmhphotos.com/photos/cv-joints/p51384-1-1-2f4-26quot-3b-end-nut-size.html
6cuda6 wrote on Thu, 18 June 2020 10:29Thank you Sir
C Boyd wrote on Wed, 17 June 2020 22:12Yes Sir.
quote title=6cuda6 wrote on Wed, 17 June 2020 22:06]I just want to confirm, before i drive 1.5hr to my tool box in storage that the axle nut needs a 1.5 inch or 38mm socket to fit it.....is this correct?
[/quote]
C. Boyd
76 Crestmont
East Tennessee
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
