GMCforum: GMCnet » "Burping" the engine cooling system

Home » Public Forums » GMCnet » "Burping" the engine cooling system

Show: Today's Messages :: Polls :: Message Navigator

"Burping" the engine cooling system [message #353816]

Wed, 15 April 2020 17:03

Scott Nutter

Messages: 782
Registered: January 2015
Location: Houston/San Diego

Karma:

Senior Member

Has anyone found it necessary to"burp" the engine cooling system to bleed out all the air after a coolant flush? Or is it unnecessary on our GMC's?
If it is needed, what would be the best technique?
Thanks, Scott.

Scott Nutter 1978 Royale Center Kitchen, Patterson 455, switch pitch tranny, 3.21 final drive, Quad bags, Dave Lenzi super duty mid axle disc brakes, tankless water heater, everything Lenzi. Alex Ferrera installed MSD Atomic EFI Houston, Texas

Report message to a moderator

[Message index]

		"Burping" the engine cooling system By: Scott Nutter on Wed, 15 April 2020 17:03
		Re: [GMCnet] "Burping" the engine cooling system By: James Hupy on Wed, 15 April 2020 17:21
		Re: [GMCnet] "Burping" the engine cooling system By: Emery Stora on Wed, 15 April 2020 17:32
		Re: "Burping" the engine cooling system By: jhbridges on Wed, 15 April 2020 18:35
		Re: "Burping" the engine cooling system By: JohnL455 on Wed, 15 April 2020 18:47
		Re: "Burping" the engine cooling system By: Scott Nutter on Wed, 15 April 2020 21:32
		Re: "Burping" the engine cooling system By: Ken Burton on Thu, 16 April 2020 08:06
		Re: "Burping" the engine cooling system By: Matt Colie on Thu, 16 April 2020 09:03
		Re: "Burping" the engine cooling system By: JohnL455 on Thu, 16 April 2020 17:11
		Re: "Burping" the engine cooling system By: Scott Nutter on Thu, 16 April 2020 17:27
		Re: "Burping" the engine cooling system By: Ken Burton on Thu, 16 April 2020 20:03

Previous Topic:	FRP for headliner
Next Topic:	Harrison four bag bolts

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 20 11:51:21 CDT 2024

Total time taken to generate the page: 0.01136 seconds