GMCforum: GMCnet » Flex Plate

Home » Public Forums » GMCnet » Flex Plate (New flex plate)

Show: Today's Messages :: Polls :: Message Navigator

Flex Plate [message #353039]

Sun, 22 March 2020 16:37

Husker92592

Messages: 137
Registered: August 2013
Location: Temecula ca

Karma:

Senior Member

GMC'Ers
so I have ordered tWO flexplates so far ATP Z116 AND PIONEER FRA 102, I also tried a buick just because and nothing is matching up to the bolt patterns on the crank. Does anyone have an idea where to get one? Is there a used one out there? its quite difficult to break in an engine if you cant start it?

thanks
Grant

1974 GMC Sequoia 26'

Report message to a moderator

[Message index]

		Flex Plate By: Husker92592 on Sun, 22 March 2020 16:37
		Re: Flex Plate By: lqqkatjon on Sun, 22 March 2020 17:19
		Re: Flex Plate By: C Boyd on Sun, 22 March 2020 19:11
		Re: Flex Plate By: Husker92592 on Mon, 23 March 2020 09:52
		Re: Flex Plate By: Matt Colie on Mon, 23 March 2020 10:47
		Re: Flex Plate By: Husker92592 on Wed, 25 March 2020 22:11
		Re: Flex Plate By: Husker92592 on Mon, 23 March 2020 09:55
		Re: Flex Plate By: C Boyd on Mon, 23 March 2020 10:46
		Re: Flex Plate By: Husker92592 on Wed, 25 March 2020 22:13
		Re: Flex Plate By: Husker92592 on Wed, 25 March 2020 22:17
		Re: Flex Plate By: Rick Staples on Wed, 25 March 2020 23:49
		Re: Flex Plate By: C Boyd on Thu, 26 March 2020 07:59
		Re: Flex Plate By: Husker92592 on Thu, 26 March 2020 12:54
		Re: Flex Plate By: C Boyd on Thu, 26 March 2020 15:16
		Re: Flex Plate By: Husker92592 on Fri, 27 March 2020 12:00
		Re: Flex Plate By: Husker92592 on Sat, 02 May 2020 02:00
		Re: Flex Plate By: Matt Colie on Sat, 02 May 2020 10:10
		Re: Flex Plate By: bobby5832708 on Mon, 23 March 2020 07:23
		Re: Flex Plate By: jhbridges on Sat, 02 May 2020 10:27
		Re: Flex Plate By: Matt Colie on Sat, 02 May 2020 17:35
		Re: Flex Plate By: Husker92592 on Fri, 08 May 2020 19:19
		Re: Flex Plate By: jhbridges on Sat, 02 May 2020 18:00
		Re: Flex Plate By: Matt Colie on Sat, 02 May 2020 18:05
		Re: Flex Plate By: kingd on Sat, 09 May 2020 20:47
		Re: Flex Plate By: Hal StClair on Sat, 09 May 2020 22:15
		Re: [GMCnet] Flex Plate By: James Hupy on Sat, 09 May 2020 23:00

Previous Topic:	[GMCnet] attwood electric water heater.
Next Topic:	GMC Assembly

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Nov 10 05:11:08 CST 2024

Total time taken to generate the page: 0.01784 seconds