| Brake Master Cylinder replacement [message #352875] |
Wed, 18 March 2020 10:17  |
Green machine
Messages: 184
Registered: July 2019
Location: North Vancouver BC
Karma:
|
Senior Member |
|
|
As the title suggests I am replacing my BMC. The bolts holding it on to the booster were a pain the @&% but with the usual combination of penetrating oil, hitting with a punch, heating, tightening and loosening, I finally freed them up.
Now I have the brake line fittings freed up from the BMC, but of course the lines are twisting with the fittings. Ive given the same treatment as above to no avail. My thought was to cut them off and reflare the lines in place as there should be plenty of room with the BMC removed. There is extra line due to the coiling beside the BMC that I'm confident i could manipulate to free up the extra inch or so i would need. Any advice or thoughts on this before I proceed with my plan?
Thanks and stay safe out there.
Shawn Harris
North Vancouver,
Canada
1977 Palm Beach 403
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
