GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Pinion Bearing Video (More in-vehicle diagnosis)
Pinion Bearing Video [message #352628] Sat, 07 March 2020 18:00 Go to previous message
uprooted is currently offline  uprooted   United States
Messages: 72
Registered: December 2019
Location: Hilliard, OH
Karma:
Member
All,

Would appreciate if anyone with experience working on the final drives would watch the short video and let me know what you think about the

https://youtu.be/NxHFgKvRd8g

I know it's difficult to see but if you look behind the ring gear you can see what appears to be some play in the pinion bearing. Is this what i am seeing, or is it some slack that's always there? Is this too much play? Also, at the end of the video you can see a small chip in one of the teeth. I'm also curious if this is bad news. This is one of 3 chips I found and is the worst.

Corey P / Hilliard, OH / 1974 Glacier 26' / 3.70 FD / ION Wheels

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: GMC STOCK CAST IRON INTAKE
Next Topic: Lug nut adapter plate
Goto Forum:
  


Current Time: Tue Nov 05 04:41:41 CST 2024

Total time taken to generate the page: 0.02645 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software