GMCforum: GMCnet » Changing front rotors if doing bearings?

Home » Public Forums » GMCnet » Changing front rotors if doing bearings?

Show: Today's Messages :: Polls :: Message Navigator

Changing front rotors if doing bearings? [message #351974]

Wed, 05 February 2020 19:48

6cuda6

Messages: 975
Registered: June 2019

Karma:

Senior Member

Are you guys changing rotors if pulling hubs or bearings? Im going to pull the hubs in the spring and repack/replace seals....

I know this is a subjective question as the rotor may still be in spec...currently i do not have vibration (well not when i parked it in the fall anyways...lol.) but can forsee possibly not the nicest rotor faces from sitting all winter though.

Rich Mondor, Brockville, ON 77 Hughes 2600

Report message to a moderator

[Message index]

		Changing front rotors if doing bearings? By: 6cuda6 on Wed, 05 February 2020 19:48
		Re: Changing front rotors if doing bearings? By: lqqkatjon on Wed, 05 February 2020 21:21
		Re: Changing front rotors if doing bearings? By: Matt Colie on Thu, 06 February 2020 08:00
		Re: [GMCnet] Changing front rotors if doing bearings? By: James Hupy on Thu, 06 February 2020 09:29
		Re: Changing front rotors if doing bearings? By: rjw on Thu, 06 February 2020 09:14
		Re: Changing front rotors if doing bearings? By: 6cuda6 on Thu, 06 February 2020 18:34
		Re: Changing front rotors if doing bearings? By: jhbridges on Fri, 07 February 2020 07:20

Previous Topic:	Gmc roof
Next Topic:	Applied GMC new website

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Sep 20 19:07:35 CDT 2024

Total time taken to generate the page: 0.00644 seconds