GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Brake Question
Brake Question [message #351530] Thu, 23 January 2020 06:10 Go to next message
Russell K. is currently offline  Russell K.   United States
Messages: 178
Registered: October 2016
Location: Dunedin, Florida
Karma: 4
Senior Member
During the drive home from our January camping trip, I noticed that there was a soft "squeek" sound when I released the brake pedal. The sound appeared to be coming from the brake pedal area inside the cockpit, not outside at any of the wheels. Could this be just a lubrication issue with the linkage, or is it a message from the booster or master cylinder that they should be replaced? The brakes appear to be functioning normally.

A little background info: I replaced the rear brakes in the fall of 2016, including wheel cylinders, shoes, spring kits, lines. I replaced the front brakes in the spring of 2017, including calipers, pads, flexible lines. I've also replaced the proportioning valve. I have not replaced the booster or the master cylinder, yet. The records show that the master cylinder was replaced in July of 2009. I do not see any record of the booster being replaced. I have a '78 so reaching the nuts on the booster might be a challenge.

I did not get to look at it after the trip because we had to empty the coach and put it away. I will have it home Saturday to look into it, along with a punch list of other issues I need to work on.

Thanks for the help.



1978 Eleganza II, Dunedin, Florida
Re: Brake Question [message #351531 is a reply to message #351530] Thu, 23 January 2020 07:12 Go to previous messageGo to next message
6cuda6 is currently offline  6cuda6   Canada
Messages: 975
Registered: June 2019
Karma: -6
Senior Member
It could be a few things and i would look at this first as its the cheapest....

1- pedal pivot pin....lub it and see
2- booster to pushrod seal rubing on rod... .silicon spray and see
3- brake light switch....push with tool/finger and see
4- pedal pivot at hanger... remove pivot pin, lube and see

From here it just gets worse...like booster etc.


Rich Mondor, Brockville, ON 77 Hughes 2600
Re: Brake Question [message #351533 is a reply to message #351531] Thu, 23 January 2020 07:52 Go to previous message
Russell K. is currently offline  Russell K.   United States
Messages: 178
Registered: October 2016
Location: Dunedin, Florida
Karma: 4
Senior Member
Thanks Rich, I'll check it out on Saturday.

Russell


1978 Eleganza II, Dunedin, Florida
Previous Topic: End play in rear control arms
Next Topic: Batteries on both sides in the engine compartment?
Goto Forum:
  


Current Time: Wed Jun 26 11:26:49 CDT 2024

Total time taken to generate the page: 0.11879 seconds