GMCforum: GMCnet » 80 mL Caliper Conversion Specifics

Home » Public Forums » GMCnet » 80 mL Caliper Conversion Specifics

Show: Today's Messages :: Polls :: Message Navigator

80 mL Caliper Conversion Specifics [message #351022]

Sat, 28 December 2019 20:47

uprooted

Messages: 72
Registered: December 2019
Location: Hilliard, OH

Karma:

Member

I've got the calipers ground down and installed, and the rubber hoses test-fitted, but can't decide exactly how to bend the metal part of the lines to get them to work. When I look at the write up here https://www.gmcmotorhome.com/commodore/front_brake/index.html, It LOOKS like they bent the lines so that the banjo fitting is at a 90 degree angle from where it began. Can anyone confirm this and/or provide better or more specific photos?

Thanks in advance

Corey P / Hilliard, OH / 1974 Glacier 26' / 3.70 FD / ION Wheels

Report message to a moderator

[Message index]

		80 mL Caliper Conversion Specifics By: uprooted on Sat, 28 December 2019 20:47
		Re: 80 mL Caliper Conversion Specifics By: Ken Burton on Sat, 28 December 2019 21:17
		Re: [GMCnet] 80 mL Caliper Conversion Specifics By: jimk on Sat, 28 December 2019 21:22
		Re: [GMCnet] 80 mL Caliper Conversion Specifics By: jimk on Sat, 28 December 2019 21:23
		Re: 80 mL Caliper Conversion Specifics By: lqqkatjon on Sat, 28 December 2019 22:09
		Re: 80 mL Caliper Conversion Specifics By: uprooted on Sat, 28 December 2019 23:12
		Re: 80 mL Caliper Conversion Specifics By: 6cuda6 on Sun, 29 December 2019 07:44
		Re: 80 mL Caliper Conversion Specifics By: jhbridges on Sun, 29 December 2019 08:30
		Re: 80 mL Caliper Conversion Specifics By: 6cuda6 on Sun, 29 December 2019 08:44
		Re: 80 mL Caliper Conversion Specifics By: Matt Colie on Mon, 30 December 2019 08:39

Previous Topic:	ProSeal for fore and aft seams
Next Topic:	Rear Bumper Caster: Help or Hindrance?

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Sep 19 16:20:57 CDT 2024

Total time taken to generate the page: 0.00998 seconds