GMCforum: GMCnet » ProSeal for fore and aft seams

Home » Public Forums » GMCnet » ProSeal for fore and aft seams (Use of aircraft fuel tank sealer for the front and rear seams.)

Show: Today's Messages :: Polls :: Message Navigator

ProSeal for fore and aft seams [message #350850]

Sat, 21 December 2019 16:09

Randy Hecht

Messages: 93
Registered: March 2019
Location: Roswell, GA

Karma:

Member

When I was in the Army working on assorted helicopters, we would use ProSeal 890 to seal seams on the airframe, transmission, and gearboxes seams or mounting points. It never seamed affected by the UV rays, rain, or temperature changes or ranges we operated in. Outside of cost associated with ProSeal, is there any issues with using it?

Report message to a moderator

[Message index]

		ProSeal for fore and aft seams By: Randy Hecht on Sat, 21 December 2019 16:09
		Re: ProSeal for fore and aft seams By: 6cuda6 on Sat, 21 December 2019 17:20
		Re: [GMCnet] ProSeal for fore and aft seams By: Randy Hecht on Sat, 21 December 2019 17:30
		Re: ProSeal for fore and aft seams By: jhbridges on Sun, 22 December 2019 11:03
		Re: ProSeal for fore and aft seams By: Richard RV on Sun, 29 December 2019 21:36
		Re: [GMCnet] ProSeal for fore and aft seams By: Randy Hecht on Sun, 29 December 2019 22:03
		Re: [GMCnet] ProSeal for fore and aft seams By: James Hupy on Sun, 29 December 2019 23:25

Previous Topic:	Pulling trailer
Next Topic:	80 mL Caliper Conversion Specifics

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Sep 19 10:36:37 CDT 2024

Total time taken to generate the page: 0.01045 seconds