GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Removing FI-Tech
Removing FI-Tech [message #349833] Sun, 03 November 2019 12:32 Go to previous message
Tom Lins is currently offline  Tom Lins   United States
Messages: 372
Registered: February 2004
Location: St Augustine, FL
Karma:
Senior Member
I am putting the carb back on the engine and I need to get the choke heater working,
both pipes are sheered off at the surface of the plate
Where does the stove get the filtered air from?
Is it the top of the back of the Carb where there is a fitting to attach a hose the would go to the input of the choke stove on the intake manifold?

Another question is can you use copper tube to go from the choke stove to the choke?
Has anyone else tried that or would that be a problem?
It is much easier to bend and not kink.

Or Does anyone have a good part number for the tube assembly?



Tom Lins
St Augustine, FL
77 GM Rear Twin, Dry Bath, 455, Aluminum Radiator Quad-Bag Suspension Solar Panel
Manuals on DVD
YOUTUBE Channel: GMC Dealer Training Tapes
http://www.bdub.net/tomlins/
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Recommendation needed for a nice quiet water pump
Next Topic: [GMCnet] Oil cooler line connections
Goto Forum:
  


Current Time: Thu Sep 19 18:58:21 CDT 2024

Total time taken to generate the page: 0.01306 seconds