Right rear turn signal issue [message #349589] |
Wed, 23 October 2019 20:46 |
Shawn Bennear
Messages: 43 Registered: February 2007 Location: Edinburg, PA
Karma:
|
Member |
|
|
I have been out tinkering with the Palm Beach and I am going to be going after the issue of no right rear turn signal. I feel pretty sure the turn signal switch in the column is OK, as the front right signal is working. I am thinking that somewhere there is a break in the wiring between the front and the rear of the coach. I am also planning on changing out the tails to LED.
I'd like to test the wires back there with my handy test light. I am not sure where to ground the test light out at. I am not sure if it will ground to the aluminium frame of the coach. I really need to get this fixed and I'm hoping I don't have to run a new wire. I'm still trying to figure out how to even access the right side taillight from inside...
Apparently, the PO must have thought it was easier to run a power wire along the frame and up through somehow. I don't like to jury rig anything, so I plan on doing this correctly.
Any thoughts would be greatly appreciated!
http://www.gmcmotorhomeworld.com
1977 Palm Beach, 403 V8 w headers.
|
|
|