GMCforum: GMCnet » Just need confirmation on heater hose sizes

Home » Public Forums » GMCnet » Just need confirmation on heater hose sizes

Show: Today's Messages :: Polls :: Message Navigator

Just need confirmation on heater hose sizes [message #348493]

Tue, 24 September 2019 14:16

Green machine

Messages: 184
Registered: July 2019
Location: North Vancouver BC

Karma:

Senior Member

Hello again gang!

I am replacing all rubber hoses on my coach. Fuel, vacuum, upper and lower rad, and heater hoses.

On the heater hoses I am going to bypass the rear heater for now and just want to confirm the sizes going to/from the heater core.

My belief is the one coming from the top rear of the intake manifold is 3/4" and the one going from the front of the engine to the inlet of the heater core is 5/8".

Can you fine folks confirm or correct my thoughts please.

TIA

Shawn Harris North Vancouver, Canada 1977 Palm Beach 403

Report message to a moderator

[Message index]

		Just need confirmation on heater hose sizes By: Green machine on Tue, 24 September 2019 14:16
		Re: Just need confirmation on heater hose sizes By: lqqkatjon on Tue, 24 September 2019 14:41
		Re: Just need confirmation on heater hose sizes By: pjburt on Tue, 24 September 2019 15:35
		Re: Just need confirmation on heater hose sizes By: pjburt on Tue, 24 September 2019 15:39
		Re: Just need confirmation on heater hose sizes By: Green machine on Tue, 24 September 2019 16:18

Previous Topic:	[GMCnet] Door lock cylinder for '74 coach
Next Topic:	Door Lock

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Feb 24 18:54:46 CST 2025

Total time taken to generate the page: 0.05940 seconds