GMCforum: GMCnet » Electrolevel Solenoids

Home » Public Forums » GMCnet » Electrolevel Solenoids - rebuilding? (Rebuilding Electrolevel solenoids)

Show: Today's Messages :: Polls :: Message Navigator

Electrolevel Solenoids - rebuilding? [message #347595]

Mon, 09 September 2019 19:06

ljdavick

Messages: 3548
Registered: March 2007
Location: Fremont, CA

Karma:

Senior Member

Has anyone had success rebuilding the solenoids on the Electrolevel system. My '76 has (4) 3-way solenoids and (2) 2-way solenoids. The old Dana compressor chugs away seemingly forever. I know it's making pressure as the gauge shows 115 psi. I don't hear any hissing and my bubble daubing has turned up nothing. Wireless air would be nice, but for nearly a Grand it's out of my ballpark right now.

Tom Hampton installed the 4-bag rear end, and with my true-trackers I'm pretty confident they'll hold up. (Not Quadra-Bag) He also installed a shut-off valve and a schrader fitting, so I might just manually adjust the back end for some time.

Any suggestions or experinece?

Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy

Report message to a moderator

[Message index]

		Electrolevel Solenoids - rebuilding? By: ljdavick on Mon, 09 September 2019 19:06
		Re: Electrolevel Solenoids - rebuilding? By: Hal StClair on Tue, 10 September 2019 00:19
		Re: Electrolevel Solenoids - rebuilding? By: ljdavick on Tue, 10 September 2019 00:26
		Re: Electrolevel Solenoids - rebuilding? By: Hal StClair on Tue, 10 September 2019 00:39
		Re: [GMCnet] Electrolevel Solenoids - rebuilding? By: ljdavick on Tue, 10 September 2019 00:42
		Re: [GMCnet] Electrolevel Solenoids - rebuilding? By: jimk on Tue, 10 September 2019 00:46
		Re: [GMCnet] Electrolevel Solenoids - rebuilding? By: Ken Henderson on Tue, 10 September 2019 04:49
		Re: [GMCnet] Electrolevel Solenoids - rebuilding? By: jimk on Tue, 10 September 2019 10:30
		Re: [GMCnet] Electrolevel Solenoids - rebuilding? By: Rich Kinas on Tue, 10 September 2019 10:34
		Re: [GMCnet] Electrolevel Solenoids - rebuilding? By: Ken Henderson on Tue, 10 September 2019 10:43
		Re: Electrolevel Solenoids - rebuilding? By: jhbridges on Tue, 10 September 2019 12:00

Previous Topic:	[GMCnet] GMCMH Curb Weights
Next Topic:	Propane tap for Grille or Firepit

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Sep 19 19:03:18 CDT 2024

Total time taken to generate the page: 0.00976 seconds