| [GMCnet] Need at least one rear hub! [message #346396] |
Tue, 13 August 2019 15:20  |
Richard Denney
Messages: 920
Registered: April 2010
Karma: 9
|
Senior Member |
|
|
I’m installing rear disks and reaction rods, along with replacing my bogie
frames a set off a newer model to get the larger pins.
Left side is all apart, and the rear race is loose in the hub. Bearing
looks perfect, but clearly it has spun. That hub has to be replaced.
I need the hub only, not the drum. But I need it fast, if possible—trying
to get this done this week.
Taking the right side apart now—the one that spun was the only one that
triggered my brain when spinning it on the coach. I’m hoping the right side
hubs are fine.
Let me know.
Rick “who NEVER has all the needed parts no matter how much preparation”
Denney
--
'73 X-Glacier 230 "Jaws"
Northern Virginia
Offlist email: rick at rickdenney dot com
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] Need at least one rear hub! [message #346397 is a reply to message #346396] |
Tue, 13 August 2019 15:59  |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
See ifJim Bouds at Coop can supply, also Tom at Gradview.
On Tue, Aug 13, 2019 at 1:21 PM Richard Denney via Gmclist <
gmclist@list.gmcnet.org> wrote:
> I’m installing rear disks and reaction rods, along with replacing my bogie
> frames a set off a newer model to get the larger pins.
>
> Left side is all apart, and the rear race is loose in the hub. Bearing
> looks perfect, but clearly it has spun. That hub has to be replaced.
>
> I need the hub only, not the drum. But I need it fast, if possible—trying
> to get this done this week.
>
> Taking the right side apart now—the one that spun was the only one that
> triggered my brain when spinning it on the coach. I’m hoping the right side
> hubs are fine.
>
> Let me know.
>
> Rick “who NEVER has all the needed parts no matter how much preparation”
> Denney
> --
> '73 X-Glacier 230 "Jaws"
> Northern Virginia
> Offlist email: rick at rickdenney dot com
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
|
|
|
|
|
|
| Re: [GMCnet] Need at least one rear hub! [message #346404 is a reply to message #346399] |
Tue, 13 August 2019 19:31 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
When Rick contacted me today, and wanted me to supply the bearings, I sent
him the part #s as they are readily available at Auto parts.
Talked myself out of a sale and saved him freight.
On Tue, Aug 13, 2019 at 3:50 PM Richard Denney via Gmclist <
gmclist@list.gmcnet.org> wrote:
> Tom,
>
> Excellent—I don’t do the forum—email only. Seven O three,
> 623-5sixtysixeight. Rick@rickdenney.com.
>
> Rick “appreciative” Denney
>
> On Tue, Aug 13, 2019 at 6:22 PM Tom McManus via Gmclist gmclist@list.gmcnet.org> wrote:
>
>> Richard
>> I have a good one. I am down in Chesapeake VA. IM me you email address
> and
>> phone number.
>> Tom
>> --
>> Tom McManus
>> 1977 Royale
>>
>> Chesapeake VA
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> --
> '73 X-Glacier 230 "Jaws"
> Northern Virginia
> Offlist email: rick at rickdenney dot com
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
|
|
| Re: [GMCnet] Need at least one rear hub! [message #346408 is a reply to message #346405] |
Tue, 13 August 2019 21:52 |
Jeanette
Messages: 118
Registered: May 2013
Karma: 0
|
Senior Member |
|
|
Thank you Jim!
Sent from my iPhone
> On Aug 13, 2019, at 8:24 PM, Richard Denney via Gmclist wrote:
>
> John, yes I did—thanks!
>
> Rick “ready to drop the old bogie frames” Denney
>
> On Tue, Aug 13, 2019 at 9:03 PM John Nicholls via Gmclist gmclist@list.gmcnet.org> wrote:
>
>> Rick, did you get the shims I mailed to you?
>>
>> --
>> John Nicholls,
>> 78 Royale w/455
>> Pensacola, FL
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> --
> '73 X-Glacier 230 "Jaws"
> Northern Virginia
> Offlist email: rick at rickdenney dot com
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
