| Electro level II questions. [message #345634] |
Tue, 23 July 2019 04:48  |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma:
|
Senior Member |
|
|
I have a 78 Eleganza sitting my my hangar with neither rear suspension compressor operational. The owner has an injured back that required surgery 2 weeks ago. So I figured that I would go fix it. I have never worked on an Electrolevel II, So I have been digging through the wiring diagrams for about an hour and think I have it figured out along with an appropriate diagnostic approach to start with.
I have a couple of simple questions before I go out there and attack this problem. The 1978 diagram shows a 30 amp CB feeding both compressors through acc position of the ignition switch. Where is that CB located? I am assuming it is behind the glove box.
The diagram also shows 2 relays, (one for each compressor). Where are they located?
See I told you they were simple questions. I could probably find them on my own once I got there but I am playing lazy right now.
Ken B.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
