| [GMCnet] Relay Lever [message #345537] |
Thu, 18 July 2019 21:29  |
Dolph Santorine
Messages: 1236
Registered: April 2011
Location: Wheeling, WV
Karma: -41
|
Senior Member |
|
|
Has anyone experienced the bolt that holds the relay lever in bottoming out?
The relay lever moves up and down about .100”, but when it’s removed from the coach and held in the vice, it’s completely static in the up/down plane.
This happened when I put it in, and when Alex Ferrara put it in as well.
The intermediate rod is completely parallel, so putting a washer under the relay lever would put it out of parallel. Putting it on the top would seem logical.
Any input is appreciated.
Dolph
DE AD0LF
Wheeling, West Virginia
1977 26’ ex-PalmBeach
Howell EFI & EBL, Reaction Arms, Manny Transmission
“The Aluminum and Fiberglass Mistress"
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] Relay Lever [message #345540 is a reply to message #345537] |
Thu, 18 July 2019 22:07  |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Dolph,
There is the inner shaft that is machined to limit the vertical clearance.
On Thu, Jul 18, 2019 at 7:30 PM Dolph Santorine via Gmclist <
gmclist@list.gmcnet.org> wrote:
> Has anyone experienced the bolt that holds the relay lever in bottoming
> out?
>
> The relay lever moves up and down about .100”, but when it’s removed from
> the coach and held in the vice, it’s completely static in the up/down plane.
>
> This happened when I put it in, and when Alex Ferrara put it in as well.
>
> The intermediate rod is completely parallel, so putting a washer under the
> relay lever would put it out of parallel. Putting it on the top would seem
> logical.
>
> Any input is appreciated.
>
>
> Dolph
>
> DE AD0LF
>
> Wheeling, West Virginia
>
> 1977 26’ ex-PalmBeach
> Howell EFI & EBL, Reaction Arms, Manny Transmission
>
> “The Aluminum and Fiberglass Mistress"
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
