GMCforum: GMCnet » window screen

Home » Public Forums » GMCnet » window screen (vs. track....)

Show: Today's Messages :: Polls :: Message Navigator

window screen [message #345529]

Thu, 18 July 2019 19:51

tmsnyder

Messages: 151
Registered: January 2014

Karma: -9

Senior Member

I'm re-doing windows and putting the screens back in but they seem really tight. Don't want to slide easily.

I have a question, which of the 5 tracks does the screen frame slide in? There are two slots / tracks on one side of the plastic strips and 3 slots on the other side.

The rest of the windows, and the wear mark inside the aluminum frame, show that the two slot side of the strip points 'out' from the opening, and the three slot side points 'in'. And the other windows have the screen frame either in the outmost slot, or straddling the second from the outside ridge of plastic. I'm not sure what's right.

Is there a diagram somewhere? The maintenance manual doesn't show it. Hopefully the assembly manual shows it, or someone could help a brother out.

Todd Snyder, Buffalo NY 1976 Eleganza II

Report message to a moderator

Re: window screen [message #345533 is a reply to message #345529]

Thu, 18 July 2019 20:51

tmsnyder

Messages: 151
Registered: January 2014

Karma: -9

Senior Member

Is my sliding screen supposed to ride in tracks like this:

https://www.gmcrvparts.com/product-p/gm23-23.073h.11.htm

b/c my tracks don't look like this. It's got 3 slots on one side and 2 on the other, and none of the slots are full depth like the one slot in the photo linked above. hmmmmm

Todd Snyder, Buffalo NY 1976 Eleganza II

Report message to a moderator

Previous Topic:	[GMCnet] Fwd: Your message to Gmclist awaits moderator approval
Next Topic:	[GMCnet] Our coach has been sold

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Sep 19 23:42:37 CDT 2024

Total time taken to generate the page: 0.00845 seconds