GMCforum: GMCnet » stock GMC intake manifold

Home » Public Forums » GMCnet » stock GMC intake manifold

Show: Today's Messages :: Polls :: Message Navigator

stock GMC intake manifold [message #345501]

Wed, 17 July 2019 23:10

Dan Borlase

Messages: 743
Registered: May 2008
Location: Kelowna B.C. Canada

Karma: 0

Senior Member

Still looking for a stock intake manifold for a 455. Obviously one with no cracks.

Report message to a moderator

Re: [GMCnet] stock GMC intake manifold [message #345513 is a reply to message #345501]

Thu, 18 July 2019 10:33

James Hupy

Messages: 6806
Registered: May 2010

Karma: -62

Senior Member

Dan, good to hear you are still on the planet. If no one closer than me
should have a manifold, I might have one. It has some broken bolts in the
choke stove passage that should be removed, and I could do that. If you are
interested, send me a photo of yours so that I can tell if the one I have
is a match for yours.
Jim Hupy

On Wed, Jul 17, 2019 at 9:11 PM Dan Borlase via Gmclist <
gmclist@list.gmcnet.org> wrote:

> Still looking for a stock intake manifold for a 455. Obviously one with
> no cracks.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Previous Topic:	Wheel spacers? Are they needed with Alcoa's?
Next Topic:	[GMCnet] Fwd: Your message to Gmclist awaits moderator approval

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 09 10:03:01 CST 2024

Total time taken to generate the page: 0.01235 seconds