|
|
|
|
| Re: [GMCnet] CV Joints [message #345134 is a reply to message #345124] |
Thu, 11 July 2019 11:28   |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Bruce, watch out as the set from Red China will have a different spline
than the origional.
You never need to aquire parts from us, but we know as our customers have
informed us .
On Thu, Jul 11, 2019 at 6:35 AM Ken Henderson via Gmclist <
gmclist@list.gmcnet.org> wrote:
> Be careful. I wouldn't order more than one of either of them until seeing
> what I got. ALL the replacement axles will have the correct outer
> splines. Just as important for the GMC is how many splines on the axle
> shaft -- many of the CV joints supplied over the past few years do NOT --
> the CV's are apparently from some other vehicle, requiring them to use
> new/modified axles with corresponding spline patterns. Those axles ARE NOT
> interchangeable with the GMC's.
>
> The photos look right, but you know how that goes -- sort of like their
> claim that those are RIGHT side axles -- L & R are the same on the
> Toronado ('tho' not on the Eldorado, which has a damper weight on the axle
> on one side -- insignificant when we replace the axle).
>
> Ken H.
>
> On Thu, Jul 11, 2019 at 7:52 AM Bruce Hart via Gmclist gmclist@list.gmcnet.org> wrote:
>
>> Good rice on CV joints. Just have to trade out the axle.
>> 33 splines is correct.
>>
>>
>>
> https://www.partsgeek.com/lr5mlgh-oldsmobile-toronado-axle-assembly.html?utm_source=shopzilla&utm_medium=pf&utm_content=dc&utm_campaign=Pa rtsGeek+ShopZilla&fp=pp&utm_term=Oldsmobile+Axle+Assembly
>>
>> --
>> Bruce Hart
>> 1976 Palm Beach
>> Milliken, Co
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] CV Joints [message #345145 is a reply to message #345134] |
Thu, 11 July 2019 15:09 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
https://cdn3.vokmgtp/v/vspfiles/photos/GM23-23.067.1-2.jpglusion.com/mjjms.
On Thu, Jul 11, 2019 at 9:28 AM Jim Kanomata wrote:
> Bruce, watch out as the set from Red China will have a different spline
> than the origional.
> You never need to aquire parts from us, but we know as our customers have
> informed us .
>
> On Thu, Jul 11, 2019 at 6:35 AM Ken Henderson via Gmclist gmclist@list.gmcnet.org> wrote:
>
>> Be careful. I wouldn't order more than one of either of them until seeing
>> what I got. ALL the replacement axles will have the correct outer
>> splines. Just as important for the GMC is how many splines on the axle
>> shaft -- many of the CV joints supplied over the past few years do NOT --
>> the CV's are apparently from some other vehicle, requiring them to use
>> new/modified axles with corresponding spline patterns. Those axles ARE
>> NOT
>> interchangeable with the GMC's.
>>
>> The photos look right, but you know how that goes -- sort of like their
>> claim that those are RIGHT side axles -- L & R are the same on the
>> Toronado ('tho' not on the Eldorado, which has a damper weight on the axle
>> on one side -- insignificant when we replace the axle).
>>
>> Ken H.
>>
>> On Thu, Jul 11, 2019 at 7:52 AM Bruce Hart via Gmclist > gmclist@list.gmcnet.org> wrote:
>>
>>> Good rice on CV joints. Just have to trade out the axle.
>>> 33 splines is correct.
>>>
>>>
>>>
>> https://www.partsgeek.com/lr5mlgh-oldsmobile-toronado-axle-assembly.html?utm_source=shopzilla&utm_medium=pf&utm_content=dc&utm_campaign=Pa rtsGeek+ShopZilla&fp=pp&utm_term=Oldsmobile+Axle+Assembly
>>>
>>> --
>>> Bruce Hart
>>> 1976 Palm Beach
>>> Milliken, Co
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
> --
> Jim Kanomata
> Applied/GMC, Newark,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
