GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » alternator belt damage
alternator belt damage [message #344687] Sun, 30 June 2019 15:02 Go to previous message
Deb is currently offline  Deb   Canada
Messages: 349
Registered: October 2016
Location: Logan Lake, BC
Karma:
Senior Member
Checking out my a/c system (finding all of the bits and pieces, compressor, lines, hoses & belts), and when I opened the hatch to get a closer look at the compressor, this is what I saw:
http://www.gmcmhphotos.com/photos/data/7218/medium/IMG_27061.jpg
http://www.gmcmhphotos.com/photos/data/7218/medium/IMG_27072.jpg
http://www.gmcmhphotos.com/photos/data/7218/medium/IMG_27081.jpg


Crawled around underneath and couldn't see any other damage to it, no cracks, doesn't look dry. Only this spot.

What's happened here? And how big a job is this to replace? And what specific belt do I get? I have seen some threads talking about newer stock replacement belts (same part # or listed as "replacement for") being the wrong size (10 vs 11 mm ) sitting too low (in the pulley I am assuming). Looks like that could have been the case here? Looks like the "lip" of those sections have been popped off like a bottle cap.

I don't know if this was like this before my Victoria trip this month, since it seems to be just the one spot, could have been like that last summer and I just never saw it because it wasn't in the right spot to view.

Thoughts?


Deb McWade Logan Lake, BC, CAN GMC Alumnus It's Bigger on the Inside!

[Updated on: Sun, 30 June 2019 15:33]

Report message to a moderator

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Suggested sealant for belt line
Next Topic: Front "G"
Goto Forum:
  


Current Time: Tue Nov 05 20:01:03 CST 2024

Total time taken to generate the page: 0.01219 seconds