GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » How to connect to the half inch plastic water lines
How to connect to the half inch plastic water lines [message #344624] Thu, 27 June 2019 21:34 Go to previous message
lw8000 is currently offline  lw8000   United States
Messages: 201
Registered: July 2012
Location: S.E. Michigan
Karma:
Senior Member
Hello all.

While on a trip we just found that one of the original tees behind the electrical cabinet has a pin leak and is cracked. I started to look at its connections and having a hard time finding a tee that will directly replace it. The original gray tubing appears to be half inch, but has a flanged end on it with the plastic nut. The plastic nut appears to be a half inch NPT thread, but I am not able to find a tee that has the correct flanged end for the gray tubing to fit.

Does anybody know if these connectors are still available somewhere? The only other thing I could think of is to cut the flanged end off and see if a tee with a pex or compression fitting will work. But, I don't want to cut off the end until known for sure.

Appreciate any help on the matter, should be a simple fix once I can find the correct parts.

Thanks!!!


Chris S. - 77 Kingsley, 3.70 FD, mostly OEM - S.E. Michigan
 
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] A really far-out GMC vehicle
Next Topic: GMC Motorhome Fuel Tanks
Goto Forum:
  


Current Time: Sun Sep 22 16:19:00 CDT 2024

Total time taken to generate the page: 0.00851 seconds