[GMCnet] Air Compressor [message #342578] |
Tue, 16 April 2019 18:59 |
glwgmc
Messages: 1014 Registered: June 2004
Karma: 10
|
Senior Member |
|
|
Hi Jon,
For a long time I used a Schrader valve right on the bags to bring my 78 Royale to correct ride height. Later I put a braided air hose directly in the bag with the Schrader valve on the other end which I attached to the T skirts to make it easier to fill. Over time that seemingly high quality braided air hose began to leak. I wound up installing the wireless air controller and found that to be a far better answer than anything to do with manually inflating/deflating Schrader valves. That set up worked so well on the Royale that I did the same thing on the 77 Clasco. Same outstanding result.
Jerry
Jerry Work
The Dovetail Joint
Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR
glwork@mac.com
http://jerrywork.com
===============
Message: 1
Date: Tue, 16 Apr 2019 12:02:10 -0600
From: Jon Roche
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] Air Compressor
Message-ID:
Content-Type: text/plain; charset="utf-8"
ah,
Dolph, depends on your coach. My 75 has a tank up in the front drivers corner(as well as that is where the viair is mounted), I just installed a T
fitting, and I also have an air guage and air line fitting there. I don't think I would install a fitting on the drain, I would be more apt to
install a T fitting somewhere.
On mine, it is on my list of To-Do's is to move my isolator valve off the air bag itself, and make a mount in the wheel wells with T and air fitting.
That way I can just use a short hose to air up the rear tires. currently my setup has the air fitting at the driver side front, so I can reach the
front tires easy enough, and the driver side rear. but for the passenger rear, I have to grab a second hose and hook them together.
--
Jon Roche
75 palm beach
St. Cloud, MN
http://lqqkatjon.blogspot.com/
======================
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jerry & Sharon Work
78 Royale
Kerby, OR
|
|
|
Re: [GMCnet] Air Compressor [message #342582 is a reply to message #342578] |
Tue, 16 April 2019 21:27 |
Dolph Santorine
Messages: 1236 Registered: April 2011 Location: Wheeling, WV
Karma: -41
|
Senior Member |
|
|
I’m using the stock setup on my 77 with the adjustable links from Dave Lenzi.
Works just fine.
Dolph Santorine
DE AD0LF
Wheeling, West Virginia
1977 ex-Palm Beach TZE167V100820
Sullybuilt Bags, Reaction Arms, Manny Transmission
> On Apr 16, 2019, at 7:59 PM, Gerald Work via Gmclist wrote:
>
> Hi Jon,
>
> For a long time I used a Schrader valve right on the bags to bring my 78 Royale to correct ride height. Later I put a braided air hose directly in the bag with the Schrader valve on the other end which I attached to the T skirts to make it easier to fill. Over time that seemingly high quality braided air hose began to leak. I wound up installing the wireless air controller and found that to be a far better answer than anything to do with manually inflating/deflating Schrader valves. That set up worked so well on the Royale that I did the same thing on the 77 Clasco. Same outstanding result.
>
> Jerry
> Jerry Work
> The Dovetail Joint
> Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR
>
> glwork@mac.com
> http://jerrywork.com
> ===============
>
> Message: 1
> Date: Tue, 16 Apr 2019 12:02:10 -0600
> From: Jon Roche
> To: gmclist@list.gmcnet.org
> Subject: Re: [GMCnet] Air Compressor
> Message-ID:
> Content-Type: text/plain; charset="utf-8"
>
> ah,
>
> Dolph, depends on your coach. My 75 has a tank up in the front drivers corner(as well as that is where the viair is mounted), I just installed a T
> fitting, and I also have an air guage and air line fitting there. I don't think I would install a fitting on the drain, I would be more apt to
> install a T fitting somewhere.
>
> On mine, it is on my list of To-Do's is to move my isolator valve off the air bag itself, and make a mount in the wheel wells with T and air fitting.
> That way I can just use a short hose to air up the rear tires. currently my setup has the air fitting at the driver side front, so I can reach the
> front tires easy enough, and the driver side rear. but for the passenger rear, I have to grab a second hose and hook them together.
>
>
>
>
> --
> Jon Roche
> 75 palm beach
> St. Cloud, MN
> http://lqqkatjon.blogspot.com/
>
> ======================
>
>
>
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|