GMCforum: GMCnet » rear main seal

Home » Public Forums » GMCnet » rear main seal (replacing rear main seal)

Show: Today's Messages :: Polls :: Message Navigator

rear main seal [message #342369]

Mon, 08 April 2019 12:37

Ken Shaffer

Messages: 89
Registered: September 2017
Location: Marion Iowa

Karma:

Member

My old tranny and final drive are out and I discovered that I have a lot of oil build-up in the bell housing. I was told now is the time to replace the rear main seal. I stopped up to a motor builder that I use and he said removing the old rope seal is very difficult. They don't offer any "in the field" work so it looks like its up to me. He did recommend a new seal from BOP engineering. (RMS04 same one as 350 diesel.)
Can anyone shed any light on this or offer any tips/tricks?

Ken Shaffer Marion Iowa 73 Canyon Lands, 455, Micro-level, Alum radiator, Alcoa wheels, Lenzi hubs/bearings, Howell EFI/EBL, Rostra Cruise, Custom interior

Report message to a moderator

[Message index]

		rear main seal By: Ken Shaffer on Mon, 08 April 2019 12:37
		Re: [GMCnet] rear main seal By: James Hupy on Mon, 08 April 2019 13:01
		Re: [GMCnet] rear main seal By: James Hupy on Mon, 08 April 2019 13:14
		Re: [GMCnet] rear main seal By: Ken Shaffer on Mon, 08 April 2019 13:39
		Re: [GMCnet] rear main seal By: James Hupy on Mon, 08 April 2019 13:49

Previous Topic:	Re: [GMCnet] Where and how is Rob Muller?
Next Topic:	Inertial Fuel Cutoff Switch

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Sep 22 01:25:38 CDT 2024

Total time taken to generate the page: 0.02151 seconds