GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] 4-post lifts?
[GMCnet] 4-post lifts? [message #340808] Sat, 09 February 2019 12:40 Go to next message
JerryW is currently offline  JerryW   United States
Messages: 256
Registered: August 2018
Karma: 1
Senior Member
Richard,

I have a four post US-made lift that is the same as the current
Backyardbuddy 7000# lift (also US-made/Warren, OH))
https://www.backyardbuddy.com/
'Installed it in 2000. 'Use it for my car "fleet". The-then manufacturer,
Autolifters/Wichita, KS lost in the completion with Backyardbuddy in 2005.
'Parts still readily available. 'Did not buy one to accommodate the GMCMh as
it would have required 1 1/2 bay's width in my garage. 'Have a 14' high
ceiling in the GMCMh portion of my garage. Regardless of the lift you buy
for home use, I strongly recommend frequent inspection for worn parts. I
have replaced one pulley for a worn journal bearing and a seal in the slave
cylinder. I bought, and recommend, the 220VAC motor option.

Fred


Fred Hudspeth
1978 Royale (TZE 368V101335) - Tyler, TX
1982 Airstream Excella (motorhome) - Cooper Landing, Alaska





Message: 8
Date: Sat, 09 Feb 2019 04:09:14 -0700
From: RJW
To: gmclist@list.gmcnet.org
Subject: [GMCnet] 4-post lifts?
Message-ID:
Content-Type: text/plain; charset="utf-8"

Our new home for our GMC is still under construction but it is all framed
and we a roof. We are still waiting on siding and trim. I will still have
a lot to do in its interior before I can park the coach inside. Hopefully I
will be done before summer.

Sometime this spring, I hope to be buy a lift to store our towed (1978
Volkswagen Super Beetle Convertible) when not in use. Also to be used for
maintenance of our cars.

Sadly there will be no room for a lift for "the Motorhome".

There seems to be dozens of companies selling lifts. I am wondering if
anyone here has had experience with 4-post lifts and could make
recommendations.
--
Richard
76 Palm Beach
SE Michigan
www.PalmBeachGMC.com


Coop Roller Cam 455, Howell TBI + EBL, 3.42 FD, Quadra Bag, Macerator, Lenzi
stuff, Manny Tranny etc.



********************************


_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Re: [GMCnet] 4-post lifts? [message #340822 is a reply to message #340808] Sat, 09 February 2019 18:19 Go to previous message
JerryW is currently offline  JerryW   United States
Messages: 256
Registered: August 2018
Karma: 1
Senior Member
Richard,
Contact Jeff Sirum at Alex Sirum GMC and ask him about his two post unit.
If properly anchored in a 6"concrete it should be ok.
We have an elaborate 4 post 18,000 with Rear and front alignment pad and
two rolling hydraulic lifts.
I like the two post as it has more clearance.
Recommend weighing advantages.

On Sat, Feb 9, 2019 at 10:41 AM Fred Hudspeth via Gmclist <
gmclist@list.gmcnet.org> wrote:

> Richard,
>
> I have a four post US-made lift that is the same as the current
> Backyardbuddy 7000# lift (also US-made/Warren, OH))
> https://www.backyardbuddy.com/
> 'Installed it in 2000. 'Use it for my car "fleet". The-then manufacturer,
> Autolifters/Wichita, KS lost in the completion with Backyardbuddy in 2005.
> 'Parts still readily available. 'Did not buy one to accommodate the GMCMh
> as
> it would have required 1 1/2 bay's width in my garage. 'Have a 14' high
> ceiling in the GMCMh portion of my garage. Regardless of the lift you buy
> for home use, I strongly recommend frequent inspection for worn parts. I
> have replaced one pulley for a worn journal bearing and a seal in the slave
> cylinder. I bought, and recommend, the 220VAC motor option.
>
> Fred
>
>
> Fred Hudspeth
> 1978 Royale (TZE 368V101335) - Tyler, TX
> 1982 Airstream Excella (motorhome) - Cooper Landing, Alaska
>
>
>
>
>
> Message: 8
> Date: Sat, 09 Feb 2019 04:09:14 -0700
> From: RJW
> To: gmclist@list.gmcnet.org
> Subject: [GMCnet] 4-post lifts?
> Message-ID:
> Content-Type: text/plain; charset="utf-8"
>
> Our new home for our GMC is still under construction but it is all framed
> and we a roof. We are still waiting on siding and trim. I will still have
> a lot to do in its interior before I can park the coach inside. Hopefully
> I
> will be done before summer.
>
> Sometime this spring, I hope to be buy a lift to store our towed (1978
> Volkswagen Super Beetle Convertible) when not in use. Also to be used for
> maintenance of our cars.
>
> Sadly there will be no room for a lift for "the Motorhome".
>
> There seems to be dozens of companies selling lifts. I am wondering if
> anyone here has had experience with 4-post lifts and could make
> recommendations.
> --
> Richard
> 76 Palm Beach
> SE Michigan
> www.PalmBeachGMC.com
>
>
> Coop Roller Cam 455, Howell TBI + EBL, 3.42 FD, Quadra Bag, Macerator,
> Lenzi
> stuff, Manny Tranny etc.
>
>
>
> ********************************
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>


--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Previous Topic: [GMCnet] Awning Removal
Next Topic: [GMCnet] On making your GMC look and feel more open
Goto Forum:
  


Current Time: Fri Nov 15 14:03:53 CST 2024

Total time taken to generate the page: 0.00941 seconds