GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Macerator Hose
Macerator Hose [message #340801] Sat, 09 February 2019 11:52 Go to previous message
Carl S. is currently offline  Carl S.   United States
Messages: 4186
Registered: January 2009
Location: Tucson, AZ.
Karma:
Senior Member

Hopefully we are mature enough to handle this discussion without too many jokes or too much innuendo Twisted Evil , but I have a question about macerator hoses.

I am still using the same macerator hose that came with the coach after ten plus years. It is a piece of 3/4" vinyl garden hose, cut to length, and fitted with a male threaded fitting clamped on the cut end. It is stored in a conduit storage pipe similar to this:

http://www.gmcmhphotos.com/photos/g3410-macerator-hose-storage.html

The problem is that the hose gets/is very stiff in cold weather, making it difficult to remove and then re insert it into the storage tube.

The question is, does anyone have any recommendations on a more pliable hose, specifically one that stays pliable in colder weather? What do you guys use?

Thanks,


Carl Stouffer '75 ex Palm Beach Tucson, AZ. Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] parking area design?
Next Topic: [GMCnet] Refinishing switch bezels?
Goto Forum:
  


Current Time: Thu Sep 19 20:02:40 CDT 2024

Total time taken to generate the page: 0.01318 seconds