GMCforum: GMCnet » [GMCnet] Ripping out the shag. Question? Added feature.

Home » Public Forums » GMCnet » [GMCnet] Ripping out the shag. Question? Added feature.

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Ripping out the shag. Question? Added feature. [message #340003]

Mon, 07 January 2019 23:40

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma:

Senior Member

We put a rubber sound reduction material down over the engine area . Then a rubber/foam backed carpet. Next only cut the two sides, and the rear edge at the screw hold downs. So I'm using those materials at the front as a hinge. Then on the right side. I installed a swing up prop rod at the right side. Has worked great. And no lifting of the entire cover anymore. Bob Dunahugh 78 Royale
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

[GMCnet] Ripping out the shag. Question? Added feature.

By: BobDunahugh on Mon, 07 January 2019 23:40

Previous Topic:	[GMCnet] Alternator fire prevention harness.
Next Topic:	[GMCnet] Is the main fuseable link wire made up of standard wire? ( It protects from overlosd fires )

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Jul 05 15:05:37 CDT 2024

Total time taken to generate the page: 0.01651 seconds