GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Outer CV boots replacement
Outer CV boots replacement [message #339011] Fri, 23 November 2018 21:13 Go to next message
Harry is currently offline  Harry   Canada
Messages: 1888
Registered: October 2007
Location: Victoria, BC CANADA
Karma: 3
Senior Member
I have both axles out. I cut off the damaged boot.
How do I get the new boot on?
Does the CV joint come off?
Thanks again for any help.
DJ
Re: [GMCnet] Outer CV boots replacement [message #339013 is a reply to message #339011] Fri, 23 November 2018 21:22 Go to previous messageGo to next message
Dolph Santorine is currently offline  Dolph Santorine   United States
Messages: 1236
Registered: April 2011
Location: Wheeling, WV
Karma: -41
Senior Member
Yes.

In all that grease is a snap ring, and you need to force it open. You might be able to use reverse needle nose, but if not a number of different companies make a tool for it.

Then you can slide the CV off (I’m assuming outer).

Dolph

DE AD0LF

Wheeling, West Virginia

1977 26’ ex-PalmBeach
Howell EFI & EBL, Reaction Arms, Sullybilt Bags, Manny Transmission

“The Aluminum and Fiberglass Mistress"

> On Nov 23, 2018, at 10:13 PM, David H. Jarvis wrote:
>
> I have both axles out. I cut off the damaged boot.
> How do I get the new boot on?
> Does the CV joint come off?
> Thanks again for any help.
> DJ
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Re: [GMCnet] Outer CV boots replacement [message #339014 is a reply to message #339011] Fri, 23 November 2018 21:27 Go to previous messageGo to next message
Dolph Santorine is currently offline  Dolph Santorine   United States
Messages: 1236
Registered: April 2011
Location: Wheeling, WV
Karma: -41
Senior Member
The tool:

https://www.amazon.com/Wilde-Tool-Pliers-Polished-Finish/dp/B00IEWBUSC/ref=sr_1_3?ie=UTF8&qid=1543029997&sr=8-3&keywords=expanding+pliers



Dolph

DE AD0LF

Wheeling, West Virginia

1977 26’ ex-PalmBeach
Howell EFI & EBL, Reaction Arms, Sullybilt Bags, Manny Transmission

“The Aluminum and Fiberglass Mistress"

> On Nov 23, 2018, at 10:13 PM, David H. Jarvis wrote:
>
> I have both axles out. I cut off the damaged boot.
> How do I get the new boot on?
> Does the CV joint come off?
> Thanks again for any help.
> DJ
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Re: [GMCnet] Outer CV boots replacement [message #339015 is a reply to message #339011] Fri, 23 November 2018 21:33 Go to previous messageGo to next message
Rob is currently offline  Rob   United States
Messages: 651
Registered: November 2013
Location: Victoria, BC
Karma: 3
Senior Member
When we did my first one at your place (mine is a 1-Ton, so a bit different?) - I recall us having issues finding that clip buried in the grease! But it’s there! Once the clip is released - it just slides out…

See figure 1 on page 3B-2 of the 1975 & 1976 Maintenance Manual for an exploded diagram.

Rob
Victoria, BC
76 Royale - Rear Twins/Dry Bath

On Nov 23, 2018, at 7:13 PM, David H. Jarvis wrote:

> I have both axles out. I cut off the damaged boot.
> How do I get the new boot on?
> Does the CV joint come off?
> Thanks again for any help.
> DJ

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



Rob - Victoria, BC - 76 Royale - Rear Twins/Dry Bath
Re: [GMCnet] Outer CV boots replacement [message #339016 is a reply to message #339015] Fri, 23 November 2018 22:24 Go to previous messageGo to next message
Harry is currently offline  Harry   Canada
Messages: 1888
Registered: October 2007
Location: Victoria, BC CANADA
Karma: 3
Senior Member
Yes, it is the outer.
I do have a set of snap ring pliers that work both ways.
Rob, what did we use when we did yours?
DJ
Re: [GMCnet] Outer CV boots replacement [message #339017 is a reply to message #339016] Fri, 23 November 2018 22:34 Go to previous messageGo to next message
Matt Colie is currently offline  Matt Colie   United States
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
Senior Member
Harry wrote on Fri, 23 November 2018 23:24
Yes, it is the outer.
I do have a set of snap ring pliers that work both ways.
Rob, what did we use when we did yours?
DJ
Harry,

It isn't a snap ring with round holes. It is a snapring with two straight ears and they stick into a depression in the center spider. If they are changeable point snapring pliers, you may want to grind flats on the other ends of a pair of tips. When you spread the ring, the shaft slides right out and the ring stay with the CV joint.

To reassemble, just push the shaft in.

You should be able to get the grease off your body in about a week.

Matt


Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
Re: [GMCnet] Outer CV boots replacement [message #339018 is a reply to message #339016] Fri, 23 November 2018 22:47 Go to previous messageGo to next message
Rob is currently offline  Rob   United States
Messages: 651
Registered: November 2013
Location: Victoria, BC
Karma: 3
Senior Member
I recall just using a set of needle-nose pliers to squeeze the ends of the clip together (but I think the clip is in a slightly different position compared to a stock CV). But I also recall banging my head against it again when I did the other side a 18 months or two years later!

The trick was to clear away some of the grease! Once I could see what was going on - it was a deja vu moment...

Rob
Victoria, BC
76 Royale - Rear Twins/Dry Bath

On Nov 23, 2018, at 8:24 PM, David H. Jarvis wrote:

> Yes, it is the outer.
> I do have a set of snap ring pliers that work both ways.
> Rob, what did we use when we did yours?
> DJ

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



Rob - Victoria, BC - 76 Royale - Rear Twins/Dry Bath
Re: [GMCnet] Outer CV boots replacement [message #339020 is a reply to message #339018] Sat, 24 November 2018 07:02 Go to previous messageGo to next message
Jp Benson is currently offline  Jp Benson   United States
Messages: 649
Registered: October 2011
Location: Fla
Karma: 2
Senior Member
With both axles out I would carefully inspect all the boots and replace any that show wear. Somewhere in the GMC archives are Ken H. instructions for changing CV joints. They were a big help when I worked on mine.

JP
Re: [GMCnet] Outer CV boots replacement [message #339021 is a reply to message #339018] Sat, 24 November 2018 07:46 Go to previous message
Mr ERFisher is currently offline  Mr ERFisher   United States
Messages: 7117
Registered: August 2005
Karma: 2
Senior Member
Read here
http://gmcmotorhome.info/front.html#new

Gene


On Fri, Nov 23, 2018 at 8:48 PM Rob wrote:

> I recall just using a set of needle-nose pliers to squeeze the ends of the
> clip together (but I think the clip is in a slightly different position
> compared to a stock CV). But I also recall banging my head against it again
> when I did the other side a 18 months or two years later!
>
> The trick was to clear away some of the grease! Once I could see what was
> going on - it was a deja vu moment...
>
> Rob
> Victoria, BC
> 76 Royale - Rear Twins/Dry Bath
>
> On Nov 23, 2018, at 8:24 PM, David H. Jarvis wrote:
>
>> Yes, it is the outer.
>> I do have a set of snap ring pliers that work both ways.
>> Rob, what did we use when we did yours?
>> DJ
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Previous Topic: Drvr/Psngr Side Windows
Next Topic: Transmission leak
Goto Forum:
  


Current Time: Fri Oct 11 07:23:22 CDT 2024

Total time taken to generate the page: 0.01708 seconds