GMCforum: GMCnet » Replacement Axles

Home » Public Forums » GMCnet » Replacement Axles (Rebuilt or fitting issues?)

Show: Today's Messages :: Polls :: Message Navigator

Replacement Axles [message #338488]

Wed, 07 November 2018 21:04

GeorgeRud

Messages: 1380
Registered: February 2007
Location: Chicago, IL

Karma:

Senior Member

I have a clunk in my front end that sounds like a CV joint going bad as it's speed related. I've read that the Toronado axles will work, but there were some fitment issues? A1Cardone shows rebuilt ones for a 75 for ~$65 plus a core charge. Can those be used? Any other concerns that I should be aware of? Thanks.

George Rudawsky
Chicago, IL
75 Palm Beach

[Updated on: Wed, 07 November 2018 21:14]

Report message to a moderator

[Message index]

		Replacement Axles By: GeorgeRud on Wed, 07 November 2018 21:04
		Re: [GMCnet] Replacement Axles By: James Hupy on Wed, 07 November 2018 21:10
		Re: [GMCnet] Replacement Axles By: James Hupy on Wed, 07 November 2018 21:12
		Re: Replacement Axles By: GeorgeRud on Wed, 07 November 2018 21:36
		Re: [GMCnet] Replacement Axles By: powwerjon on Wed, 07 November 2018 22:12
		Re: [GMCnet] Replacement Axles By: jimk on Wed, 07 November 2018 22:10
		Re: [GMCnet] Replacement Axles By: Ken Henderson on Wed, 07 November 2018 22:20
		Re: [GMCnet] Replacement Axles By: Dave Stragand on Thu, 08 November 2018 06:04
		Re: [GMCnet] Replacement Axles By: Ken Henderson on Thu, 08 November 2018 06:11
		Re: [GMCnet] Replacement Axles By: Mr ERFisher on Thu, 08 November 2018 06:21
		Re: [GMCnet] Replacement Axles By: jessfarr on Thu, 08 November 2018 12:28
		Re: Replacement Axles By: GeorgeRud on Thu, 08 November 2018 08:03
		Re: [GMCnet] Replacement Axles By: jimk on Thu, 08 November 2018 11:11
		Re: Replacement Axles By: GeorgeRud on Thu, 08 November 2018 20:59

Previous Topic:	[GMCnet] Fw: Coach in Distress
Next Topic:	[GMCnet] Getting road ready - Replacing the old rubber

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Nov 18 14:24:59 CST 2024

Total time taken to generate the page: 0.00980 seconds