GMCforum: GMCnet » Bronzed/Brazed front hubs?

Home » Public Forums » GMCnet » Bronzed/Brazed front hubs? (My front hubs appear to have been altered...)

Show: Today's Messages :: Polls :: Message Navigator

Bronzed/Brazed front hubs? [message #338270]

Thu, 01 November 2018 13:56

cgsonoma

Messages: 3
Registered: August 2018
Location: N. W. Oregon

Karma: 0

Junior Member

Hello,

I am a new member/owner. Working on rebuilding brakes and suspension. During disc replacement I noticed that the bearing surface of the hubs appear to have been bronzed or brazed. Is this something that was commonly done/normal?

I'm not able to post a picture on here larger than 1KB and I don't have anywhere online that I host pictures to link to... so maybe if you know something you can PM me and I can send it to you that way.

Thanks for the help,
Nathan

Report message to a moderator

Re: [GMCnet] Bronzed/Brazed front hubs? [message #338273 is a reply to message #338270]

Thu, 01 November 2018 15:11

jimk

Messages: 6734
Registered: July 2006
Location: Belmont, CA

Karma: 9

Senior Member

NO, the brass is too soft and will not endure.
Either get one from Dave Lenze, or we can supply.
I will walk yo through the process so you do not need to touch it for
80,000 miles. Something I leaarned back in 1985 from couple sharp mechanic
and machinest.

On Thu, Nov 1, 2018 at 11:57 AM Nate wrote:

> Hello,
>
> I am a new member/owner. Working on rebuilding brakes and suspension.
> During disc replacement I noticed that the bearing surface of the hubs
> appear
> to have been bronzed or brazed. Is this something that was commonly
> done/normal?
>
> I'm not able to post a picture on here larger than 1KB and I don't have
> anywhere online that I host pictures to link to... so maybe if you know
> something you can PM me and I can send it to you that way.
>
> Thanks for the help,
> Nathan
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502

Report message to a moderator

Re: [GMCnet] Bronzed/Brazed front hubs? [message #338276 is a reply to message #338273]

Thu, 01 November 2018 15:54

cgsonoma

Messages: 3
Registered: August 2018
Location: N. W. Oregon

Karma: 0

Junior Member

Roger that, thanks for the info. Dave said the same thing in an email but I was hoping I'd get an answer the fit better into my budget, hahaha!

Report message to a moderator

Re: [GMCnet] Bronzed/Brazed front hubs? [message #338277 is a reply to message #338276]

Thu, 01 November 2018 16:04

Carl S.

Messages: 4186
Registered: January 2009
Location: Tucson, AZ.

Karma: 13

Senior Member

Hate to tell you this, but you might as well throw your budget out the window. Wink

Wink

Carl Stouffer '75 ex Palm Beach Tucson, AZ. Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member

Report message to a moderator

Re: Bronzed/Brazed front hubs? [message #338278 is a reply to message #338270]

Thu, 01 November 2018 18:48

Matt Colie

Messages: 8547
Registered: March 2007
Location: S.E. Michigan

Karma: 7

Senior Member

cgsonoma wrote on Thu, 01 November 2018 14:56

Hello,

I am a new member/owner. Working on rebuilding brakes and suspension. During disc replacement I noticed that the bearing surface of the hubs appear to have been bronzed or brazed. Is this something that was commonly done/normal?

I'm not able to post a picture on here larger than 1KB and I don't have anywhere online that I host pictures to link to... so maybe if you know something you can PM me and I can send it to you that way.

Thanks for the help,
Nathan

Nathan,

Welcome to the group, family, cult, asylum.....

You may not be aware that you have just tapped into a couple of hundred brand new old friends.

Your particular situation at this point is how well the bronze metalizing was and what alloy was used. This is a common repair in the marine trades, but not often used at the loads of a TZE front bearing. This begs the question, have the races made tracks in the bronze? If not, you may be able to use them for a while.

Next question: What about the insides of the knuckles?
If the outer races are loose in there, you need to get that fixed. As said either JimK or Dave can do this and do it well. Both of them think that they have the best way, and both respect each other.

As to pictures, you can open a Dropbox account (free for a small one) [url]dropbox.com[/url] and then put pictures in the "Public" directory and send links from that.

Now, if you could please do both us and yourself a small favor. You are on the forum side of the group, and if you build a sigfile, it will save everybody a lot of time. Just go to <Control Panel/Account Settings> and scroll down. Please put in your name, so we know who we just met, a short bit about the coach (year and model can matter) and any serious mods and lastly a geographic reference. You note PNW at one point, but Sanoma is down by Frisco and not a place I would expect to find CG. (You have to scroll down to <update> to save it.)

This is all part of being a member of a very uncommon community. These are an amazing group of people that want nothing more than for you to get to enjoy what the coach can do for you. It is a lot more than just a big toy because it connects you to this community of which JimK and Dave Lenzi are a part and both are good examples. The way to annoy them is to ignore the good advice you can get here. The only other community that I know of that is this supportive is that of the watermen that are my world. Because of that, I like to welcome new owners here much as any new owner or vessel is welcomed there. So,

May the Good Lord bless this coach and all those that set forth within her.

Welcome Nathan

Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

Re: [GMCnet] Bronzed/Brazed front hubs? [message #338279 is a reply to message #338277]

Thu, 01 November 2018 18:54

Matt Colie

Messages: 8547
Registered: March 2007
Location: S.E. Michigan

Karma: 7

Senior Member

Carl S. wrote on Thu, 01 November 2018 17:04

Hate to tell you this, but you might as well throw your budget out the window.

Carl says that, but if you get the hubs done right, they will never be an issue again. This is one thing that an owner can't effectively repair. When done right, servicing the front wheel bearing becomes a non-issue and Performance Friction pad won't tear the disks up. That means you are good for a long time.

There are lots of us that put lots of miles on our coaches every year and there are few incidents of on-road failures.

Speaking of, Get a good grease gun and find where you can buy either Mobil1 or Valvoline Synpro (vv985) grease and try real hard to over grease both the ~14 fittings in the front and the bogie pins.

Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

Re: [GMCnet] Bronzed/Brazed front hubs? [message #338286 is a reply to message #338277]

Thu, 01 November 2018 23:00

sgltrac

Messages: 2797
Registered: April 2011

Karma: 1

Senior Member

U slay me Carl

Sully
Bellevue wa.

On Thu, Nov 1, 2018 at 2:05 PM Carl Stouffer wrote:

> Hate to tell you this, but you might as well throw your budget out the
> window. ;)
> --
> Carl Stouffer
> '75 ex Palm Beach
> Tucson, AZ.
> Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive,
> Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American
> Eagles,
> Solar battery charging. GMCSJ and GMCMI member
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Sully 77 Royale basket case. Future motorhome land speed record holder(bucket list) Seattle, Wa.

Report message to a moderator

Re: [GMCnet] Bronzed/Brazed front hubs? [message #338288 is a reply to message #338286]

Fri, 02 November 2018 09:18

Carl S.

Messages: 4186
Registered: January 2009
Location: Tucson, AZ.

Karma: 13

Senior Member

sgltrac wrote on Thu, 01 November 2018 21:00

U slay me Carl

Sully
Bellevue wa.

On Thu, Nov 1, 2018 at 2:05 PM Carl Stouffer wrote:

> Hate to tell you this, but you might as well throw your budget out the
> window.
> --
> Carl Stouffer
> '75 ex Palm Beach
> Tucson, AZ.
> Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive,
> Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American
> Eagles,
> Solar battery charging. GMCSJ and GMCMI member
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Just sayin'. I started out thinking I could do this on a budget too, 40 - 50K later I'm still spending money and working on it constantly. It's all been more than worth it though for all the ten years and 40,000 miles of fun we've had.

Carl Stouffer '75 ex Palm Beach Tucson, AZ. Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member

Report message to a moderator

Re: [GMCnet] Bronzed/Brazed front hubs? [message #338289 is a reply to message #338288]

Fri, 02 November 2018 09:41

sgltrac

Messages: 2797
Registered: April 2011

Karma: 1

Senior Member

Prior to my gmc ownership I have done a few auto restorations. The amount
of time / money / energy an automobile restoration consumes was enough for
me to swear off any more restorations. After my first gmc (4 years and 30+k
later) an automobile restoration seems trivial.

Sully
Bellevue wa.

On Fri, Nov 2, 2018 at 7:19 AM Carl Stouffer wrote:

> sgltrac wrote on Thu, 01 November 2018 21:00
>> U slay me Carl
>>
>> Sully
>> Bellevue wa.
>>
>> On Thu, Nov 1, 2018 at 2:05 PM Carl Stouffer wrote:
>>
>>> Hate to tell you this, but you might as well throw your budget out the
>>> window. ;)
>>> --
>>> Carl Stouffer
>>> '75 ex Palm Beach
>>> Tucson, AZ.
>>> Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final
> drive,
>>> Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American
>>> Eagles,
>>> Solar battery charging. GMCSJ and GMCMI member
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
> Just sayin'. I started out thinking I could do this on a budget too, 40
> - 50K later I'm still spending money and working on it constantly. It's all
> been more than worth it though for all the ten years and 40,000 miles of
> fun we've had.
> --
> Carl Stouffer
> '75 ex Palm Beach
> Tucson, AZ.
> Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive,
> Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American
> Eagles,
> Solar battery charging. GMCSJ and GMCMI member
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Sully 77 Royale basket case. Future motorhome land speed record holder(bucket list) Seattle, Wa.

Report message to a moderator

Re: [GMCnet] Bronzed/Brazed front hubs? [message #338290 is a reply to message #338288]

Fri, 02 November 2018 09:42

James Hupy

Messages: 6806
Registered: May 2010

Karma: -62

Senior Member

Budget? We don' need no stinkin' budget! What could possibly go wrong with
a 40+ year old vehicle that sits unused for a great deal of its life,
besides EVERYTHING, AND MORE THAN ONCE, TOO.
Jim Hupy
Salem, Oregon
78 GMC ROYALE 403

On Fri, Nov 2, 2018, 7:19 AM Carl Stouffer wrote:

> sgltrac wrote on Thu, 01 November 2018 21:00
>> U slay me Carl
>>
>> Sully
>> Bellevue wa.
>>
>> On Thu, Nov 1, 2018 at 2:05 PM Carl Stouffer wrote:
>>
>>> Hate to tell you this, but you might as well throw your budget out the
>>> window. ;)
>>> --
>>> Carl Stouffer
>>> '75 ex Palm Beach
>>> Tucson, AZ.
>>> Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final
> drive,
>>> Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American
>>> Eagles,
>>> Solar battery charging. GMCSJ and GMCMI member
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
> Just sayin'. I started out thinking I could do this on a budget too, 40
> - 50K later I'm still spending money and working on it constantly. It's all
> been more than worth it though for all the ten years and 40,000 miles of
> fun we've had.
> --
> Carl Stouffer
> '75 ex Palm Beach
> Tucson, AZ.
> Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive,
> Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American
> Eagles,
> Solar battery charging. GMCSJ and GMCMI member
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: [GMCnet] Bronzed/Brazed front hubs? [message #338291 is a reply to message #338289]

Fri, 02 November 2018 10:00

James Hupy

Messages: 6806
Registered: May 2010

Karma: -62

Senior Member

My last automobile restoration was on a 1961 Cadillac small roof Coupe
deVille. Body on, but front clip removed. Over $3500.00 in chrome playing.
Total costs involved? Over $40,000.00 in 1986. Beautiful car, show winner,
great freeway flyer. Award winner at Reno's Hot August Nights. And lots of
memories. Sold it when Mary got sick to pay medical expenses. Less than
$20,000.00. Very, very typical. We don't do it for the money.
Jim Hupy
Salem, Or
78 GMC ROYALE 403

On Fri, Nov 2, 2018, 7:42 AM Todd Sullivan wrote:

> Prior to my gmc ownership I have done a few auto restorations. The amount
> of time / money / energy an automobile restoration consumes was enough for
> me to swear off any more restorations. After my first gmc (4 years and 30+k
> later) an automobile restoration seems trivial.
>
> Sully
> Bellevue wa.
>
> On Fri, Nov 2, 2018 at 7:19 AM Carl Stouffer wrote:
>
>> sgltrac wrote on Thu, 01 November 2018 21:00
>>> U slay me Carl
>>>
>>> Sully
>>> Bellevue wa.
>>>
>>> On Thu, Nov 1, 2018 at 2:05 PM Carl Stouffer wrote:
>>>
>>>> Hate to tell you this, but you might as well throw your budget out
> the
>>>> window. ;)
>>>> --
>>>> Carl Stouffer
>>>> '75 ex Palm Beach
>>>> Tucson, AZ.
>>>> Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final
>> drive,
>>>> Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear
> American
>>>> Eagles,
>>>> Solar battery charging. GMCSJ and GMCMI member
>>>>
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>> Just sayin'. I started out thinking I could do this on a budget too, 40
>> - 50K later I'm still spending money and working on it constantly. It's
> all
>> been more than worth it though for all the ten years and 40,000 miles of
>> fun we've had.
>> --
>> Carl Stouffer
>> '75 ex Palm Beach
>> Tucson, AZ.
>> Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive,
>> Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American
>> Eagles,
>> Solar battery charging. GMCSJ and GMCMI member
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: [GMCnet] Bronzed/Brazed front hubs? [message #338294 is a reply to message #338291]

Fri, 02 November 2018 12:24

Mike Kelley

Messages: 467
Registered: February 2017

Karma: -2

Senior Member

James H.:
Amen brother - same for updating, remodeling, resurrecting GMC’s!
Not in it for the money - just want them safe, reliable, comfortable, pretty, & saved from the bone yard (in that order)!!!
Mike/The Corvair a holic

Sent from my iPhone

> On Nov 2, 2018, at 10:01 AM, James Hupy wrote:
>
> My last automobile restoration was on a 1961 Cadillac small roof Coupe
> deVille. Body on, but front clip removed. Over $3500.00 in chrome playing.
> Total costs involved? Over $40,000.00 in 1986. Beautiful car, show winner,
> great freeway flyer. Award winner at Reno's Hot August Nights. And lots of
> memories. Sold it when Mary got sick to pay medical expenses. Less than
> $20,000.00. Very, very typical. We don't do it for the money.
> Jim Hupy
> Salem, Or
> 78 GMC ROYALE 403
>
>> On Fri, Nov 2, 2018, 7:42 AM Todd Sullivan wrote:
>>
>> Prior to my gmc ownership I have done a few auto restorations. The amount
>> of time / money / energy an automobile restoration consumes was enough for
>> me to swear off any more restorations. After my first gmc (4 years and 30+k
>> later) an automobile restoration seems trivial.
>>
>> Sully
>> Bellevue wa.
>>
>>> On Fri, Nov 2, 2018 at 7:19 AM Carl Stouffer wrote:
>>>
>>> sgltrac wrote on Thu, 01 November 2018 21:00
>>>> U slay me Carl
>>>>
>>>> Sully
>>>> Bellevue wa.
>>>>
>>>> > On Thu, Nov 1, 2018 at 2:05 PM Carl Stouffer wrote:
>>>> >
>>>> > Hate to tell you this, but you might as well throw your budget out
>> the
>>>> > window. ;)
>>>> > --
>>>> > Carl Stouffer
>>>> > '75 ex Palm Beach
>>>> > Tucson, AZ.
>>>> > Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final
>>> drive,
>>>> > Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear
>> American
>>>> > Eagles,
>>>> > Solar battery charging. GMCSJ and GMCMI member
>>>> >
>>>> > _______________________________________________
>>>> > GMCnet mailing list
>>>> > Unsubscribe or Change List Options:
>>>> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>> >
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>>> Just sayin'. I started out thinking I could do this on a budget too, 40
>>> - 50K later I'm still spending money and working on it constantly. It's
>> all
>>> been more than worth it though for all the ten years and 40,000 miles of
>>> fun we've had.
>>> --
>>> Carl Stouffer
>>> '75 ex Palm Beach
>>> Tucson, AZ.
>>> Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive,
>>> Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American
>>> Eagles,
>>> Solar battery charging. GMCSJ and GMCMI member
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: Bronzed/Brazed front hubs? [message #338299 is a reply to message #338270]

Fri, 02 November 2018 14:01

cgsonoma

Messages: 3
Registered: August 2018
Location: N. W. Oregon

Karma: 0

Junior Member

Thanks for the welcoming into the community! Almost met some of you at the Fall Rally at Mt. Hood. Got the dates mixed up otherwise I would been there. Keeping an eye out for the next close one.

Thought my budget was semi-realistic, estimated $14k to get just the mechanical portion updated/upgraded (doing 99% of the work myself). Didn't include hub/knuckle/spindle replacements in it though... not sure I want to see the numbers with them added, hahaha!

Biggest concern now, what other "incorrect" repairs have been made? If anyone has any "this'll leave you stranded" list that I should check, please send it my way. Planning a full bearing/brakes replacement before I even drive it but I almost missed the bronze hubs (glad I'd just emailed Dave to ask about prices and had hub repair on my mind). Actually installed the passenger side already but as someone mentioned above, the bearing were FAR from loose so it should last me for the short time until I'm motivated to tear it back down and replace it.

Nate

Report message to a moderator

Re: [GMCnet] Bronzed/Brazed front hubs? [message #338300 is a reply to message #338289]

Fri, 02 November 2018 14:47

Dave Stragand

Messages: 307
Registered: October 2017

Karma: 0

Senior Member

True! I put about $25,000 into a $3,000 DeLorean (not counting about
3,000 hours of labor). Not the most economical investment, but it sure
was fun.

"The state of mind which enables a man to do work of this kind is akin
to that of the religious worshipper or the lover. The daily effort comes
from no deliberate intention or program, but straight from the heart." -
Albert Einstein, 1918

It's about the love of the vehicle, love of the challenge, or the
sentiment that outweighs the cash spent.

-Dave
1978 Transmode near Pittsburgh

-----Original Message-----
From: Gmclist [mailto:gmclist-bounces@list.gmcnet.org] On Behalf Of Todd
Sullivan
Sent: Friday, November 02, 2018 10:41 AM
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] Bronzed/Brazed front hubs?

Prior to my gmc ownership I have done a few auto restorations. The
amount
of time / money / energy an automobile restoration consumes was enough
for
me to swear off any more restorations. After my first gmc (4 years and
30+k
later) an automobile restoration seems trivial.

Sully
Bellevue wa.

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

1978 Transmode (403) Pittsburgh, PA

Report message to a moderator

Re: [GMCnet] Bronzed/Brazed front hubs? [message #338396 is a reply to message #338300]

Mon, 05 November 2018 15:51

Keith V

Messages: 2337
Registered: March 2008
Location: Mounds View,MN

Karma: 0

Senior Member

at least with cars there is hope of some return. Sports/Dance/Art have zero chance of any return!
________________________________
From: Gmclist on behalf of Dave Stragand
Sent: Friday, November 2, 2018 2:47 PM
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] Bronzed/Brazed front hubs?

True! I put about $25,000 into a $3,000 DeLorean (not counting about
3,000 hours of labor). Not the most economical investment, but it sure
was fun.

"The state of mind which enables a man to do work of this kind is akin
to that of the religious worshipper or the lover. The daily effort comes
from no deliberate intention or program, but straight from the heart." -
Albert Einstein, 1918

It's about the love of the vehicle, love of the challenge, or the
sentiment that outweighs the cash spent.

-Dave
1978 Transmode near Pittsburgh

-----Original Message-----
From: Gmclist [mailto:gmclist-bounces@list.gmcnet.org] On Behalf Of Todd
Sullivan
Sent: Friday, November 02, 2018 10:41 AM
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] Bronzed/Brazed front hubs?

Prior to my gmc ownership I have done a few auto restorations. The
amount
of time / money / energy an automobile restoration consumes was enough
for
me to swear off any more restorations. After my first gmc (4 years and
30+k
later) an automobile restoration seems trivial.

Sully
Bellevue wa.

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com

Report message to a moderator

Re: Bronzed/Brazed front hubs? [message #338409 is a reply to message #338270]

Tue, 06 November 2018 08:37

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma: -74

Senior Member

My GMC reminds me of my old BSA Victor Special scoot. Loved it, and like the GMC, you had to love it to put up with it.

--johnny

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

Report message to a moderator

Re: [GMCnet] Bronzed/Brazed front hubs? [message #338416 is a reply to message #338409]

Tue, 06 November 2018 08:57

James Hupy

Messages: 6806
Registered: May 2010

Karma: -62

Senior Member

Never had a Victor, but I had a couple of it's predecessors, the GOLD STAR.
If it didn't have a pool of oil under it, you had better refill it. Engine
had it's own supply, clutch and primary chain case had theirs, and the
transmission it's own as well. Engine had power like a tractor. Stump
puller. But, you could sit down and ride it instead of standing up.
Jim Hupy

On Tue, Nov 6, 2018, 6:38 AM Johnny Bridges via Gmclist <
gmclist@list.gmcnet.org> wrote:

> My GMC reminds me of my old BSA Victor Special scoot. Loved it, and like
> the GMC, you had to love it to put up with it.
>
> --johnny
> --
> Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
> Braselton, Ga.
> "I forgive them all, save those who hurt the dogs. They must answer to me
> in hell" - ol Andy, paraphrased
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: Bronzed/Brazed front hubs? [message #338418 is a reply to message #338270]

Tue, 06 November 2018 09:09

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma: -74

Senior Member

Had a 350 for a bit also. the Victor (440cc Thumper) leaked 40-50 weight from the dry sump system, 30 weight from the clutch/chain case and 90 weight from the transmission. It invented torque. It also invented vibration at freeway speeds. Get off after a couple hours and kind of float for a while. Lovely old Scooter.

--johnny

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

Report message to a moderator

Previous Topic:	[GMCnet] 1973 Reconditioned Canyonland - 26' in Iowa
Next Topic:	[GMCnet] Stretch

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 16 21:50:48 CST 2024

Total time taken to generate the page: 0.01396 seconds