GMCforum: GMCnet » Re: [GMCnet] Rear panel screws

Home » Public Forums » GMCnet » Re: [GMCnet] Rear panel screws

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Rear panel screws [message #336600]

Sat, 01 September 2018 12:23

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma: 11

Senior Member

I have some of the crews at home. I want a lot for them. FREE. Be back home next week. Out with the GMC now. So that we can compile another list of things that I have to do to it. RIGHT? To repair the hole. How about filling the hole with something like JB weld. Let it harden. Then drill a fresh hole that's a little under size. So the screw can cut new threads. I've used an extra screw to make into a tap of sort. Not much load on this screws. Bob Dunahugh Highly modified 78 Royale
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: [GMCnet] Rear panel screws [message #336603 is a reply to message #336600]

Sat, 01 September 2018 13:09

jimk

Messages: 6734
Registered: July 2006
Location: Belmont, CA

Karma: 9

Senior Member

Get hold of Jim Bounds at Coop.
Make it brief and ask him, he will tell you how to do it.

On Sat, Sep 1, 2018 at 10:23 AM Bob Dunahugh wrote:

> I have some of the crews at home. I want a lot for them. FREE. Be back
> home next week. Out with the GMC now. So that we can compile another list
> of things that I have to do to it. RIGHT? To repair the hole. How about
> filling the hole with something like JB weld. Let it harden. Then drill a
> fresh hole that's a little under size. So the screw can cut new threads.
> I've used an extra screw to make into a tap of sort. Not much load on this
> screws. Bob Dunahugh Highly modified 78 Royale
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502

Report message to a moderator

Re: [GMCnet] Rear panel screws [message #336648 is a reply to message #336600]

Sun, 02 September 2018 14:50

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma: -74

Senior Member

I looked at a coach for sale Friday which was missing some screws and had some large hex cap screws in place of many others. Seller said they were HeliCoiled <tm>.

--johnny

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

Report message to a moderator

Previous Topic:	[GMCnet] Interesting note on the 403 piston bore size
Next Topic:	[GMCnet] Happy Birthday Rob

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Nov 08 00:55:34 CST 2024

Total time taken to generate the page: 0.00802 seconds