Home » Public Forums » GMCnet » [GMCnet] Replacement furnace for 78 Eleganza
| [GMCnet] Replacement furnace for 78 Eleganza [message #336405] |
Mon, 27 August 2018 01:36  |
<rallymaster
Messages: 361
Registered: May 2014
Karma: 2
|
Senior Member |
|
|
What is an easy replacement for the 30,000 BTU Duo-Therm in a 78 GMC
Eleganza?
The Duo-Therm is roughly 23" deep, 15" wide, and 14" high.
the Suburban SF30FQ would fit, but it's too wide (17") to just slide in
from the front. Looks like it would have to go in from the side, after
removing the sofa.
Anyone know of an easier one to install?
Thanks,
RonC
Ron & Linda Clark
1978 Eleganza II
North Plains, ORYGUN
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] Replacement furnace for 78 Eleganza [message #336407 is a reply to message #336405] |
Mon, 27 August 2018 08:10  |
Kosier
Messages: 834
Registered: February 2008
Karma: 1
|
Senior Member |
|
|
Ron,
I assume your Duotherm has died. If so, is the solenoid in the gas train
still alive? I need one for my 77 Eleganza.
Gary Kosier
77PB w/500Cad
Newark, Ohio
--------------------------------------------------
From:
Sent: Monday, August 27, 2018 2:36 AM
To:
Subject: [GMCnet] Replacement furnace for 78 Eleganza
>
> What is an easy replacement for the 30,000 BTU Duo-Therm in a 78 GMC
> Eleganza?
> The Duo-Therm is roughly 23" deep, 15" wide, and 14" high.
>
> the Suburban SF30FQ would fit, but it's too wide (17") to just slide in
> from the front. Looks like it would have to go in from the side, after
> removing the sofa.
>
> Anyone know of an easier one to install?
>
> Thanks,
>
> RonC
>
> Ron & Linda Clark
> 1978 Eleganza II
> North Plains, ORYGUN
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] Replacement furnace for 78 Eleganza [message #336431 is a reply to message #336405] |
Mon, 27 August 2018 14:40 |
<rallymaster
Messages: 361
Registered: May 2014
Karma: 2
|
Senior Member |
|
|
Gary, I'll let you know after I figure out how to check it.
At the moment, nothing happens when I turn it on. Have 12 volts to the
unit on one of the plug wires, and the furnace fuse is good.
Last time I tried it, something buzzzed or clicked for about 2 seconds,
then nothing. Now, nothing at any time.
Ron
On Mon, 27 Aug 2018 09:10:57 -0400 "Gary Kosier"
writes:
> Ron,
>
> I assume your Duotherm has died. If so, is the solenoid in the gas
> train
> still alive? I need one for my 77 Eleganza.
>
> Gary Kosier
> 77PB w/500Cad
> Newark, Ohio
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] Replacement furnace for 78 Eleganza [message #336432 is a reply to message #336431] |
Mon, 27 August 2018 16:05 |
Kosier
Messages: 834
Registered: February 2008
Karma: 1
|
Senior Member |
|
|
Ron,
Pull the wires off one of the terminals and check for continuity
between the terminals. Continuity is good, mine is bad.
Gary Kosier
77PB w/500Cad
Newark, Ohio
--------------------------------------------------
From:
Sent: Monday, August 27, 2018 3:40 PM
To:
Subject: Re: [GMCnet] Replacement furnace for 78 Eleganza
>
> Gary, I'll let you know after I figure out how to check it.
> At the moment, nothing happens when I turn it on. Have 12 volts to the
> unit on one of the plug wires, and the furnace fuse is good.
> Last time I tried it, something buzzzed or clicked for about 2 seconds,
> then nothing. Now, nothing at any time.
>
> Ron
>
> On Mon, 27 Aug 2018 09:10:57 -0400 "Gary Kosier"
> writes:
>> Ron,
>>
>> I assume your Duotherm has died. If so, is the solenoid in the gas
>> train
>> still alive? I need one for my 77 Eleganza.
>>
>> Gary Kosier
>> 77PB w/500Cad
>> Newark, Ohio
>>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] Replacement furnace for 78 Eleganza [message #336444 is a reply to message #336405] |
Mon, 27 August 2018 20:29 |
pzerkel
Messages: 212
Registered: September 2007
Location: Salisbury, IL
Karma: 0
|
Senior Member |
|
|
Anyone have an answer to the original question (easy replacement for Duotherm furnace). I too am looking to replace a Duotherm furnace in a 78 Eleganza?
Paul Zerkel
'78 Eleganza II
Salisbury IL (near Springfield)
|
|
|
|
| Re: [GMCnet] Replacement furnace for 78 Eleganza [message #336453 is a reply to message #336432] |
Mon, 27 August 2018 23:01 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
I can quote a delivered price on an Suburban unit that will fit in your
coach.
We install them on GMC MH all the time and I can help you do the exterior
exaust outlets and other detail.
Call me as we understand the appliances and the GMC MH.
On Mon, Aug 27, 2018 at 2:06 PM Gary Kosier wrote:
> Ron,
> Pull the wires off one of the terminals and check for continuity
> between the terminals. Continuity is good, mine is bad.
>
> Gary Kosier
> 77PB w/500Cad
> Newark, Ohio
>
> --------------------------------------------------
> From:
> Sent: Monday, August 27, 2018 3:40 PM
> To:
> Subject: Re: [GMCnet] Replacement furnace for 78 Eleganza
>
>>
>> Gary, I'll let you know after I figure out how to check it.
>> At the moment, nothing happens when I turn it on. Have 12 volts to the
>> unit on one of the plug wires, and the furnace fuse is good.
>> Last time I tried it, something buzzzed or clicked for about 2 seconds,
>> then nothing. Now, nothing at any time.
>>
>> Ron
>>
>> On Mon, 27 Aug 2018 09:10:57 -0400 "Gary Kosier" >
>> writes:
>>> Ron,
>>>
>>> I assume your Duotherm has died. If so, is the solenoid in the gas
>>> train
>>> still alive? I need one for my 77 Eleganza.
>>>
>>> Gary Kosier
>>> 77PB w/500Cad
>>> Newark, Ohio
>>>
>>
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] Replacement furnace for 78 Eleganza [message #336460 is a reply to message #336405] |
Tue, 28 August 2018 08:08 |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
My Suburban slides in from the front of the cabinet. To do this, Miguel - or someone - trimmed the bottom and side of the opening a bit. NOt enough to show - the door still covers everything - but just enough to slide the furnace in and out the front of the cabinet.
Before you do that, check the thermostat if it's the original. I woke freezing my tukus off in Savannah last December. Stat was calling for heat, but when I touched the contact leaf thefurnace fired up. The contacts has gotten corroded over the years. Put in a new one (mercury container) and it works fine.
--johnny
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
| Re: [GMCnet] Replacement furnace for 78 Eleganza [message #336467 is a reply to message #336405] |
Tue, 28 August 2018 12:53 |
<rallymaster
Messages: 361
Registered: May 2014
Karma: 2
|
Senior Member |
|
|
Thank you, Johnny, for both of your comments.
RonC
On Tue, 28 Aug 2018 07:08:01 -0600 Johnny Bridges via Gmclist
writes:
> My Suburban slides in from the front of the cabinet. To do this,
> Miguel - or someone - trimmed the bottom and side of the opening a
> bit. NOt enough
> to show - the door still covers everything - but just enough to
> slide the furnace in and out the front of the cabinet.
> Before you do that, check the thermostat if it's the original. I
> woke freezing my tukus off in Savannah last December. Stat was
> calling for heat,
> but when I touched the contact leaf thefurnace fired up. The
> contacts has gotten corroded over the years. Put in a new one
> (mercury container) and
> it works fine.
>
> --johnny
> --
> 76 26' Eleganza(?) with beaucoup mods and add - ons.
> Braselton, Ga.
> "I forgive them all, save those who hurt the dogs. They must answer
> to me in hell" - ol Andy, paraphrased
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
Ron & Linda Clark
1978 Eleganza II
North Plains, ORYGUN
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] Replacement furnace for 78 Eleganza [message #336881 is a reply to message #336405] |
Mon, 10 September 2018 01:26 |
<rallymaster
Messages: 361
Registered: May 2014
Karma: 2
|
Senior Member |
|
|
Gary, I haven't forgotten you, I'm still trying to coax some life out of
the beast.
I can't change the furnace, and there's no one around here that I'd trust
to do the job without screwing it up, keeping it for a month, or charging
$$$$$$$$$$. Or probably all of the above.
ron
>> On Mon, 27 Aug 2018 09:10:57 -0400 "Gary Kosier"
>
>> writes:
>>> Ron,
>>>
>>> I assume your Duotherm has died. If so, is the solenoid in the
> gas
>>> train
>>> still alive? I need one for my 77 Eleganza.
>>>
>>> Gary Kosier
>>> 77PB w/500Cad
>>> Newark, Ohio
>>>
>>
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
Goto Forum:
Current Time: Tue Nov 05 15:09:11 CST 2024
Total time taken to generate the page: 0.01048 seconds
|
GMCforum
Search
Help
Register
Login
Home
