| [GMCnet] Engine noise - silent running [message #333986] |
Mon, 25 June 2018 15:16 |
glwgmc
Messages: 1014
Registered: June 2004
Karma:
|
Senior Member |
|
|
Hi Peer
I will answer in case Chuck can’t. I used Silent running on the under side of the cockpit floor and under the cover. I found it far better than any of the black and foil sheets I tried on our other coach. Doing it up side down with a brush and roller is a messy and slow job. I did three or four coats. It gets quieter as it cures. Take about a week to fully cure. Dry to touch or recoat in a few hours. Highly recommended.
Jerry
Jerry Work
Kerby, OR
.........
ate: Mon, 25 Jun 2018 09:02:10 -0600
From: Peer Oliver Schmidt
To: gmclist@list.gmcnet.org
Subject: [GMCnet] Engine Noise - Silent Running
Message-ID:
Content-Type: text/plain; charset="utf-8"
Hello,
I tried to contact Chuck Botts directly via eMail and PM, both didn't work, so here comes a plain forum message, input from others is greatly
appreciated as well:
I read your article (http://gmcws.org/blog/silent-running-how-to-reduce-engine-noise-by-chuck-botts/) about using Silent Running SR-500 on your
cockpit's
floor.
No idea, when you did it, but are you still satisfied with the results,
or would you do something different nowadays?
--
Best regards
Peer Oliver Schmidt
PGP Key ID: 0x83E1C2EA
'76a Eleganza II, VA
'73 Sequoia, SH, Germany
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jerry & Sharon Work
78 Royale
Kerby, OR
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
