GMCforum: GMCnet » onan removal

Home » Public Forums » GMCnet » onan removal

Show: Today's Messages :: Polls :: Message Navigator

onan removal [message #333687]

Tue, 19 June 2018 08:51

lqqkatjon

Messages: 2324
Registered: October 2010
Location: St. Cloud, MN

Karma:

Senior Member

For those who have removed the onan, what was the preferred method?

I see that you can basically install and eye bolt, and lift it up with a cherry picker. Looks like Jim Bounds lifts them from the bottom with a scissor lift thing:

https://i0.wp.com/www.gmccoop.com/wp-content/uploads/2018/01/1.31.18-morning-5.jpg?w=1500

I also wondered if a ATV/motorcycle jack would work.

what is easier? Any other pointers?

I am pulling it to clean up the compartment, fix the 110v power(hoping for bad connector or bridge rectifier). I have access to a cherry picker, and I think I can get a scissor table like jim is using.

Jon Roche 75 palm beach EBL EFI, manny headers, Micro Level, rebuilt most of coach now. St. Cloud, MN http://lqqkatjon.blogspot.com/

Report message to a moderator

[Message index]

		onan removal By: lqqkatjon on Tue, 19 June 2018 08:51
		Re: [GMCnet] onan removal By: RicksGMC on Tue, 19 June 2018 09:26
		Re: onan removal By: Beach Coach on Tue, 19 June 2018 09:55
		Re: onan removal By: Carl S. on Tue, 19 June 2018 10:57
		Re: onan removal By: RF_Burns on Tue, 19 June 2018 11:55
		Re: onan removal By: thesmith on Sat, 23 June 2018 18:28
		Re: [GMCnet] onan removal By: Richard Denney on Tue, 19 June 2018 18:04
		Re: onan removal By: Matt Colie on Tue, 19 June 2018 18:31
		Re: onan removal By: jhbridges on Wed, 20 June 2018 10:32

Previous Topic:	[GMCnet] Rotating Bags
Next Topic:	[GMCnet] Without an APC, what wires can get damaged?

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Nov 18 13:23:21 CST 2024

Total time taken to generate the page: 0.00650 seconds