GMCforum: GMCnet » [GMCnet] Slip ring, and brushes distroyed on the Onan.

Home » Public Forums » GMCnet » [GMCnet] Slip ring, and brushes distroyed on the Onan.

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Slip ring, and brushes distroyed on the Onan. [message #333130]

Wed, 06 June 2018 14:20

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma: 11

Senior Member

I've never seen this happen to the Onan 110 volt generator brushes. Maybe the Onan was operated while driving on a lot of gravel roads. Iinteresting. Bob Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: [GMCnet] Slip ring, and brushes distroyed on the Onan. [message #333172 is a reply to message #333130]

Thu, 07 June 2018 11:30

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma: 3

Senior Member

Bob,
I ordered this from Ebay (search for item 310760400781 on ebay). It has 6 brush mounts and 12 brushes, enough to do 3 generators for $35.00. The connection appears to be a bolt type instead of a 1/4" quick connect so you may need a small terminal block.

As for the slip rings, maybe Jim Miller can help?

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

Previous Topic:	73 Waste outlet size vs FloJet portable macerator size
Next Topic:	[GMCnet] GMCMI Iowa Rally. Windshield install session

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Nov 06 09:38:35 CST 2024

Total time taken to generate the page: 0.00923 seconds