Home » Public Forums » GMCnet » Anyone here have my pressure brake bleeder?
| Anyone here have my pressure brake bleeder? [message #332778] |
Wed, 30 May 2018 02:05  |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
About 10 or 12 years ago I loaned it to someone in Michigan. He returned it by mail. Not long after that I loaned it to someone else who stopped by my hangar. I do not remember if that party ever returned it or not. All I know is I now need it and I can not find it.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
|
|
| Re: Anyone here have my pressure brake bleeder? [message #332795 is a reply to message #332778] |
Wed, 30 May 2018 10:36  |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
I try to avoid the 'chain - loan' if I can, and do a lot of email. That said, Larry Davick had a great set of A-6 tools.
--johnny
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
|
|
| Re: [GMCnet] Anyone here have my pressure brake bleeder? [message #332798 is a reply to message #332791] |
Wed, 30 May 2018 10:33 |
sgltrac
Messages: 2797
Registered: April 2011
Karma: 1
|
Senior Member |
|
|
Both good reasons to have a tool sign out list in your shop ( or just to
not loan tools). Not that anyone would likely keep the tool on purpose but
folks not in the repair industry cannot appreciate the hassle of looking
for a tool when a job is waiting and probably put the borrowed tool “ in a
spot” and then promptly forget about it.
Sully
77 eleganza 2
Bellevue.
On Wed, May 30, 2018 at 8:27 AM Gary Kosier wrote:
> Ken,
>
> I can sympathize with you. Some years ago, I loaned out my Kent-Moore
> bogie
> bushing reamer. I didn't pay attention to who got it
> because it had always come back. This time it didn't.
>
> Gary Kosier
> --------------------------------------------------
> From: "Ken Burton"
> Sent: Wednesday, May 30, 2018 3:05 AM
> To:
> Subject: [GMCnet] Anyone here have my pressure brake bleeder?
>
>> About 10 or 12 years ago I loaned it to someone in Michigan. He
> returned
>> it by mail. Not long after that I loaned it to someone else who stopped
>> by
>> my hangar. I do not remember if that party ever returned it or not.
> All
>> I know is I now need it and I can not find it.
>> --
>> Ken Burton - N9KB
>> 76 Palm Beach
>> Hebron, Indiana
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Sully
77 Royale basket case.
Future motorhome land speed record holder(bucket list)
Seattle, Wa.
|
|
|
|
| Re: [GMCnet] Anyone here have my pressure brake bleeder? [message #332799 is a reply to message #332798] |
Wed, 30 May 2018 10:41 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
After loaning out special tools and not getting them back, we never let a
tool out without a healthy refundable charge.
When they complain, I just flat tell them to go else where.
Half of the time it comes back damaged, but we get it back and refund the
deposit.
On Wed, May 30, 2018 at 8:33 AM, Todd Sullivan wrote:
> Both good reasons to have a tool sign out list in your shop ( or just to
> not loan tools). Not that anyone would likely keep the tool on purpose but
> folks not in the repair industry cannot appreciate the hassle of looking
> for a tool when a job is waiting and probably put the borrowed tool “ in a
> spot” and then promptly forget about it.
>
> Sully
> 77 eleganza 2
> Bellevue.
>
> On Wed, May 30, 2018 at 8:27 AM Gary Kosier
> wrote:
>
>> Ken,
>>
>> I can sympathize with you. Some years ago, I loaned out my Kent-Moore
>> bogie
>> bushing reamer. I didn't pay attention to who got it
>> because it had always come back. This time it didn't.
>>
>> Gary Kosier
>> --------------------------------------------------
>> From: "Ken Burton"
>> Sent: Wednesday, May 30, 2018 3:05 AM
>> To:
>> Subject: [GMCnet] Anyone here have my pressure brake bleeder?
>>
>>> About 10 or 12 years ago I loaned it to someone in Michigan. He
>> returned
>>> it by mail. Not long after that I loaned it to someone else who
> stopped
>>> by
>>> my hangar. I do not remember if that party ever returned it or not.
>> All
>>> I know is I now need it and I can not find it.
>>> --
>>> Ken Burton - N9KB
>>> 76 Palm Beach
>>> Hebron, Indiana
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
|
|
| Re: [GMCnet] Anyone here have my pressure brake bleeder? [message #332809 is a reply to message #332805] |
Wed, 30 May 2018 14:40 |
Mr ERFisher
Messages: 7117
Registered: August 2005
Karma: 2
|
Senior Member |
|
|
It is just not fair
Everyone knows old farts like us cannot remember ten years ago 😀😀😀
On Wed, May 30, 2018 at 9:47 AM Billy Massey wrote:
> Ken, I'll send you mine. Just don't forget where you got it. :-)
> Should be there in 3 days.
>
> btw, I've been loaning out a Bearing Puller donated by Alex Ferrara and a
> torsion bar unloader donated by Larry Weidner for 2 or 3 years now. All
> information on the borrower is posted to a special tool specific calendar.
> Never had a problem getting them back. (knock on wood) :-)
>
> bdub
>
> On Wed, May 30, 2018 at 10:39 AM, Ken Burton wrote:
>
>> Gary,
>>
>> It may be worst than that in my case. I do not know if it came back and
> I
>> lost it, or if it never came back and is still out there somewhere.
>> --
>> Ken Burton - N9KB
>> 76 Palm Beach
>> Hebron, Indiana
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] Anyone here have my pressure brake bleeder? [message #332815 is a reply to message #332809] |
Wed, 30 May 2018 17:16 |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
TEN YEARS?
MORE LIKE 10 MINUTES! :-)
Regards,
Rob M.
The Pedantic Mechanic
Sydney, Australia
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
USA '77 Kingsley - TZE 267V100808
-----Original Message-----
From: Gmclist [mailto:gmclist-bounces@list.gmcnet.org] On Behalf Of gene Fisher
Sent: Wednesday, May 30, 2018 2:40 PM
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] Anyone here have my pressure brake bleeder?
It is just not fair
Everyone knows old farts like us cannot remember ten years ago 😀😀😀
On Wed, May 30, 2018 at 9:47 AM Billy Massey wrote:
> Ken, I'll send you mine. Just don't forget where you got it. :-)
> Should be there in 3 days.
>
> btw, I've been loaning out a Bearing Puller donated by Alex Ferrara and a
> torsion bar unloader donated by Larry Weidner for 2 or 3 years now. All
> information on the borrower is posted to a special tool specific calendar.
> Never had a problem getting them back. (knock on wood) :-)
>
> bdub
>
> On Wed, May 30, 2018 at 10:39 AM, Ken Burton wrote:
>
>> Gary,
>>
>> It may be worst than that in my case. I do not know if it came back and
> I
>> lost it, or if it never came back and is still out there somewhere.
>> --
>> Ken Burton - N9KB
>> 76 Palm Beach
>> Hebron, Indiana
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
| Re: [GMCnet] Anyone here have my pressure brake bleeder? [message #332820 is a reply to message #332795] |
Wed, 30 May 2018 18:42 |
 |
ljdavick
Messages: 3548
Registered: March 2007
Location: Fremont, CA
Karma: -3
|
Senior Member |
|
|
I'd forgotten about that little kit, I wonder where it is!
Likely in the garage, I hope.
Larry Davick
Fremont, California
A Mystery Machine
'76 (ish) Palm Beach
> On May 30, 2018 at 8:36 AM Johnny Bridges via Gmclist wrote:
>
>
> I try to avoid the 'chain - loan' if I can, and do a lot of email. That said, Larry Davick had a great set of A-6 tools.
>
> --johnny
> --
> 76 26' Eleganza(?) with beaucoup mods and add - ons.
> Braselton, Ga.
> "I forgive them all, save those who hurt the dogs. They must answer to me in hell" - ol Andy, paraphrased
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy
|
|
|
|
|
|
| Re: [GMCnet] Anyone here have my pressure brake bleeder? [message #332826 is a reply to message #332821] |
Wed, 30 May 2018 20:08 |
|
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Well there you go!
Albert made a liar out of Gene and me! :-)
Regards,
Rob M.
The Pedantic Mechanic
Sydney, Australia
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
USA '77 Kingsley - TZE 267V100808
-----Original Message-----
From: Gmclist [mailto:gmclist-bounces@list.gmcnet.org] On Behalf Of Albert&Sheila Branscombe
Sent: Wednesday, May 30, 2018 6:52 PM
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] Anyone here have my pressure brake bleeder?
Hey Gary ,
You gave it to me in 2008 , I used it a couple of times and at a rally in 2009 Blaine Merrill suggested he could make some so I sent
it to him and he received it on Tuesday , Nov. 09, 2010 . I'll send you the corresponding emails.
Cheers......Albert
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
| Re: [GMCnet] Anyone here have my pressure brake bleeder? [message #332832 is a reply to message #332821] |
Wed, 30 May 2018 21:55 |
Kosier
Messages: 834
Registered: February 2008
Karma: 1
|
Senior Member |
|
|
Albert,
Yes, Blaine returned it at a GMCMI gathering and someone else immediately
borrowed it. I didn't worry at the time because GMCers
have always been so good about returning things. But, this
time,,,,,,,,,,,,,,,,,,,,,, Oh well!
Gary Kosier
77PB w/500Cad
Newark, Ohio
--------------------------------------------------
From: "Albert&Sheila Branscombe"
Sent: Wednesday, May 30, 2018 7:52 PM
To:
Subject: Re: [GMCnet] Anyone here have my pressure brake bleeder?
> Hey Gary ,
>
> You gave it to me in 2008 , I used it a couple of times and at a rally in
> 2009 Blaine Merrill suggested he could make some so I sent it to him and
> he
> received it on Tuesday , Nov. 09, 2010 . I'll send you the corresponding
> emails.
> Cheers......Albert
> 78 Barbi the 23 foot Birchaven
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] Anyone here have my pressure brake bleeder? [message #332835 is a reply to message #332815] |
Wed, 30 May 2018 23:09 |
sgltrac
Messages: 2797
Registered: April 2011
Karma: 1
|
Senior Member |
|
|
Currently when I think back 10 years it is actually 15-20. So 5 years
memory actually equals 10 years calendar. At least for me. Good thing they
date stamp tires.......
Sully
Someone else’s 77 eleganza 2
Bellevue.
On Wed, May 30, 2018 at 3:17 PM Rob Mueller wrote:
> TEN YEARS?
>
> MORE LIKE 10 MINUTES! :-)
>
> Regards,
> Rob M.
> The Pedantic Mechanic
> Sydney, Australia
> AUS '75 Avion - The Blue Streak TZE365V100428
> USA '75 Avion - Double Trouble TZE365V100426
> USA '77 Kingsley - TZE 267V100808
>
>
>
> -----Original Message-----
> From: Gmclist [mailto:gmclist-bounces@list.gmcnet.org] On Behalf Of gene
> Fisher
> Sent: Wednesday, May 30, 2018 2:40 PM
> To: gmclist@list.gmcnet.org
> Subject: Re: [GMCnet] Anyone here have my pressure brake bleeder?
>
> It is just not fair
> Everyone knows old farts like us cannot remember ten years ago 😀😀😀
>
>
> On Wed, May 30, 2018 at 9:47 AM Billy Massey wrote:
>
>> Ken, I'll send you mine. Just don't forget where you got it. :-)
>> Should be there in 3 days.
>>
>> btw, I've been loaning out a Bearing Puller donated by Alex Ferrara and
> a
>> torsion bar unloader donated by Larry Weidner for 2 or 3 years now. All
>> information on the borrower is posted to a special tool specific
> calendar.
>> Never had a problem getting them back. (knock on wood) :-)
>>
>> bdub
>>
>> On Wed, May 30, 2018 at 10:39 AM, Ken Burton wrote:
>>
>>> Gary,
>>>
>>> It may be worst than that in my case. I do not know if it came back
> and
>> I
>>> lost it, or if it never came back and is still out there somewhere.
>>> --
>>> Ken Burton - N9KB
>>> 76 Palm Beach
>>> Hebron, Indiana
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> --
> Gene Fisher -- 74-23,77PB/ore/ca
> “Give a man a fish; you have fed him for today --- give him a URL and
> -------
> http://gmcmotorhome.info/
> Alternator Protection Cable
> http://gmcmotorhome.info/APC.html
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Sully
77 Royale basket case.
Future motorhome land speed record holder(bucket list)
Seattle, Wa.
|
|
|
|
| Re: [GMCnet] Anyone here have my pressure brake bleeder? [message #332837 is a reply to message #332805] |
Thu, 31 May 2018 00:36 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
bdub wrote on Wed, 30 May 2018 11:47Ken, I'll send you mine. Just don't forget where you got it. 
Should be there in 3 days.
btw, I've been loaning out a Bearing Puller donated by Alex Ferrara and a
torsion bar unloader donated by Larry Weidner for 2 or 3 years now. All
information on the borrower is posted to a special tool specific calendar.
Never had a problem getting them back. (knock on wood)
bdub
On Wed, May 30, 2018 at 10:39 AM, Ken Burton wrote:
> Gary,
>
> It may be worst than that in my case. I do not know if it came back and I
> lost it, or if it never came back and is still out there somewhere.
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Billy,
DO NOT SEND IT.
I have enough parts around here to make another one.
Thanks for the offer.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: [GMCnet] Anyone here have my pressure brake bleeder? [message #332850 is a reply to message #332837] |
Thu, 31 May 2018 08:28 |
bdub
Messages: 1578
Registered: February 2004
Location: Central Texas
Karma: 5
|
Senior Member |
|
|
You're about 12 hours too late. It should be in your mailbox in another 24
or so.
bdub
-----Original Message-----
From: Gmclist Behalf Of Ken Burton
Sent: Thursday, May 31, 2018 12:37 AM
Subject: Re: [GMCnet] Anyone here have my pressure brake bleeder?
bdub wrote on Wed, 30 May 2018 11:47
> Ken, I'll send you mine. Just don't forget where you got it. :)
> Should be there in 3 days.
>
> btw, I've been loaning out a Bearing Puller donated by Alex Ferrara and a
> torsion bar unloader donated by Larry Weidner for 2 or 3 years now. All
> information on the borrower is posted to a special tool specific calendar.
> Never had a problem getting them back. (knock on wood) :)
>
> bdub
>
> On Wed, May 30, 2018 at 10:39 AM, Ken Burton wrote:
Billy,
DO NOT SEND IT.
I have enough parts around here to make another one.
Thanks for the offer.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
bdub
'76 Palm Beach/Central Texas
www.bdub.net
www.gmcmhphotos.com
www.gmcmotorhomemarketplace.com
www.gmcmhregistry.com
www.facebook.com/groups/classicgmcmotorhomes
www.facebook.com/groups/gmcmm
|
|
|
|
|
|
| Re: [GMCnet] Anyone here have my pressure brake bleeder? [message #332861 is a reply to message #332850] |
Thu, 31 May 2018 14:12 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
OK, I use it and return it.
Ken B.
bdub wrote on Thu, 31 May 2018 08:28You're about 12 hours too late. It should be in your mailbox in another 24
or so.
bdub
-----Original Message-----
From: Gmclist Behalf Of Ken Burton
Sent: Thursday, May 31, 2018 12:37 AM
Subject: Re: [GMCnet] Anyone here have my pressure brake bleeder
bdub wrote on Wed, 30 May 2018 11:47
> Ken, I'll send you mine. Just don't forget where you got it.
> Should be there in 3 days.
>
> btw, I've been loaning out a Bearing Puller donated by Alex Ferrara and a
> torsion bar unloader donated by Larry Weidner for 2 or 3 years now. All
> information on the borrower is posted to a special tool specific calendar.
> Never had a problem getting them back. (knock on wood)
>
> bdub
>
> On Wed, May 30, 2018 at 10:39 AM, Ken Burton wrote:
Billy,
DO NOT SEND IT.
I have enough parts around here to make another one.
Thanks for the offer.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: [GMCnet] Anyone here have my pressure brake bleeder? [message #332874 is a reply to message #332861] |
Thu, 31 May 2018 17:18 |
C Boyd
Messages: 2629
Registered: April 2006
Karma: 18
|
Senior Member |
|
|
I hope you didn't send it UPS! They don't seem to know where Ken lives.
Ken Burton wrote on Thu, 31 May 2018 15:12OK, I use it and return it.
Ken B.
bdub wrote on Thu, 31 May 2018 08:28You're about 12 hours too late. It should be in your mailbox in another 24
or so.
bdub
-----Original Message-----
From: Gmclist Behalf Of Ken Burton
Sent: Thursday, May 31, 2018 12:37 AM
Subject: Re: [GMCnet] Anyone here have my pressure brake bleeder
bdub wrote on Wed, 30 May 2018 11:47
> Ken, I'll send you mine. Just don't forget where you got it.
> Should be there in 3 days.
>
> btw, I've been loaning out a Bearing Puller donated by Alex Ferrara and a
> torsion bar unloader donated by Larry Weidner for 2 or 3 years now. All
> information on the borrower is posted to a special tool specific calendar.
> Never had a problem getting them back. (knock on wood)
>
> bdub
>
> On Wed, May 30, 2018 at 10:39 AM, Ken Burton wrote:
Billy,
DO NOT SEND IT.
I have enough parts around here to make another one.
Thanks for the offer.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
C. Boyd
76 Crestmont
East Tennessee
|
|
|
|
Goto Forum:
Current Time: Sun Nov 17 02:38:27 CST 2024
Total time taken to generate the page: 0.01546 seconds
|
GMCforum
Search
Help
Register
Login
Home
