Home » Public Forums » GMCnet » [GMCnet] stock airbag replacement
[GMCnet] stock airbag replacement [message #332707] |
Mon, 28 May 2018 21:01 |
Burt and Faye curtis
Messages: 256 Registered: June 2012
Karma:
|
Senior Member |
|
|
Due to a smallish leak in my airbag, I am in the midst of removing and
replacing it. I have copied off pretty good instructions and in them in
states to loosen the nut on the nonair inflation side. Then to remove the
nut on the other side (ok, it does mention several things to do before, but
I am cutting to the chase here). It says if when trying to loosen the
second nut, the entire stud spins, to stop. Next deflate bag, remove nut on
other side and then spin the bag off. This leaves the inflate side nut
captive in the mounting bracket. To remove it, one is to use an easy out.
This makes sense, but I was wondering if there might be an easier way that
one of you have been using. If not, Wednesday I use the above method.
Thanks in advance for help/ideas/
Fay Curtis
'76 Glenbrook
Kneeland, CA
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
Goto Forum:
Current Time: Fri Nov 15 21:18:17 CST 2024
Total time taken to generate the page: 0.00979 seconds
|