Socket size for lug nuts? [message #332603] |
Sat, 26 May 2018 16:34 |
Deb
Messages: 349 Registered: October 2016 Location: Logan Lake, BC
Karma: 2
|
Senior Member |
|
|
Went to re-torque the wheels (should be done since they were newly installed when I picked it up and have had about 300 miles on them now). What size socket do i need? I have a 1/2" 50-250 ft-lb torque wrench but not the appropriate socket size in my honkin' big Stanley set
Rather than do this trial and error, I thought I would ask.
Deb McWade
Logan Lake, BC, CAN
GMC Alumnus
It's Bigger on the Inside!
|
|
|
|
|
|
|
|
|
Re: Socket size for lug nuts? [message #332689 is a reply to message #332644] |
Mon, 28 May 2018 12:26 |
Deb
Messages: 349 Registered: October 2016 Location: Logan Lake, BC
Karma: 2
|
Senior Member |
|
|
1" it was! All done. Next chore - lube & oil change. Doing this in stages - one at a time.
Deb McWade
Logan Lake, BC, CAN
GMC Alumnus
It's Bigger on the Inside!
|
|
|