Home » Public Forums » GMCnet » Accessory Grounding???? (Good place to ground my accessories in the cockpit area.)
| Accessory Grounding???? [message #332419] |
Tue, 22 May 2018 17:00  |
 |
DrMeznik
Messages: 9
Registered: December 2017
Location: New Braunfels, TX
Karma: 0
|
Junior Member |
|
|
Hey, it has been a while since I posted on here. And lord help me I was soooo much an annoying novice.
I am installing LED fog lights on my bumper and a wireless rearview camera. Both need a good ground in the cockpit area. I can send pictures if necessary.
So, my question is: Where can I find the best ground for the switch for my foglights and my backup camera????
I am sure that I am missing it somewhere. It's getting painted on Friday, I'd like to have this hooked up before the new stripe and touch up is done.
Update, I have abandoned my solar stuff. I am actually going to sell this rig and buy a 23ft shorty or outfit a t1n Sprinter. The 26fter is a bit too much space for just me. Perfect for 2 though.
Too much work has been done.... Quadrabags installed (not impressed with some of the hardware--has anyone taken their rig to a lowrider shop? I figured they would know really good fittings and whatnots), reconfigured the rear bedroom area to accommodate a Queen or pull up into the U shaped dinette/ lounge area. New custom curtains throughout. Um, blade fuse box and 3 stage smart charger with a new AGM 100ah battery. If I were going to keep it, I'd take out the 3 way fridge and put in a residential fridge running on a dedicated inverter off a 300 watt solar panel. Oh, and new master cylinder, some new lines and a new sensitized brake booster (brake system flushed and filled with DOT3). Of course belts and plugs. Also, new countertop, large/ deep industrial style sink and sprayer with a pot filler. New vanity light and waterfall faucet in bathroom. Also, new industrial vinyl tile flooring throughout. Still being put together but it's finally coming along.
1978 Royale,
26 Foot,
403 Engine,
Quadrabags,
|
|
|
|
|
|
|
|
|
|
| Re: Accessory Grounding???? [message #332428 is a reply to message #332419] |
Tue, 22 May 2018 20:53  |
Scott Nutter
Messages: 782
Registered: January 2015
Location: Houston/San Diego
Karma: 4
|
Senior Member |
|
|
Out of courisitoty. what parts of the hardware, and why, in reference to the quadrabags are you not "impressed" with?
Scott Nutter
1978 Royale Center Kitchen, Patterson 455, switch pitch tranny, 3.21 final drive, Quad bags, Dave Lenzi super duty mid axle disc brakes, tankless water heater, everything Lenzi. Alex Ferrera installed MSD Atomic EFI
Houston, Texas
|
|
|
|
| Re: Accessory Grounding???? [message #332430 is a reply to message #332419] |
Tue, 22 May 2018 21:41 |
|
DrMeznik
Messages: 9
Registered: December 2017
Location: New Braunfels, TX
Karma: 0
|
Junior Member |
|
|
First thanks so much for your help!
I was sort of let down with the cheap air pressure gauge, the fittings, and the air manifold. The riseres are a genius peice of engineering and that's what you are paying for. I think it is definately worth the money and considerring the functionality that they serve, it is a good deal. I also think you're paying for technical phone calls (which I didn't need). I would also like if they threw in bag isolators for the money.
All the mounting stuff for the risers and the risers themselves are amazing.
I would recomend them for anyone and installing them isn't difficult with the right tools there's a dreaded step. And that one can frustate you but it isn't too complicated.
If I were to keep it, I would take out the old air compressor and electro level. Then, I would take it to a lowrider shop where they could run new lines, fittings, isolator valves, air manifold a "bling bling" mechanical switch in the current electro level switch board location.
I don't think they're ripping people off. My only suggestion for Applied would be to drop the price $300-$400 and offer a deluxe model for $1800-$2000.
1978 Royale,
26 Foot,
403 Engine,
Quadrabags,
|
|
|
|
| Re: Accessory Grounding???? [message #332434 is a reply to message #332423] |
Tue, 22 May 2018 23:28 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
As Bruce stated there are 2 convenient engine side grounds in the area where you are working.
1. Under the passenger side hood there is a metal plate that the isolator and boost solenoids are mounted on. I would connect any accessory that runs off of the engine battery and alternator to that plate for ground.
2. The aluminum plate on the drivers side that the gauges are mounted in is also a good engine side ground.
Do NOT try to pick up ground right off of the bumper. It will not usually work because of the shock mounting devices that hold the bumper attached.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: Accessory Grounding???? [message #332435 is a reply to message #332419] |
Wed, 23 May 2018 07:28 |
 |
Matt Colie
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
|
Senior Member |
|
|
DrMeznik wrote on Tue, 22 May 2018 18:00Hey, it has been a while since I posted on here. And lord help me I was soooo much an annoying novice.
I am installing LED fog lights on my bumper and a wireless rearview camera. Both need a good ground in the cockpit area. I can send pictures if necessary.
So, my question is: Where can I find the best ground for the switch for my foglights and my backup camera????
I am sure that I am missing it somewhere. It's getting painted on Friday, I'd like to have this hooked up before the new stripe and touch up is done.
Update, I have abandoned my solar stuff. I am actually going to sell this rig and buy a 23ft shorty or outfit a t1n Sprinter. The 26fter is a bit too much space for just me. Perfect for 2 though.
Too much work has been done.... Quadrabags installed (not impressed with some of the hardware--has anyone taken their rig to a lowrider shop? I figured they would know really good fittings and whatnots), reconfigured the rear bedroom area to accommodate a Queen or pull up into the U shaped dinette/ lounge area. New custom curtains throughout. Um, blade fuse box and 3 stage smart charger with a new AGM 100ah battery. If I were going to keep it, I'd take out the 3 way fridge and put in a residential fridge running on a dedicated inverter off a 300 watt solar panel. Oh, and new master cylinder, some new lines and a new sensitized brake booster (brake system flushed and filled with DOT3). Of course belts and plugs. Also, new countertop, large/ deep industrial style sink and sprayer with a pot filler. New vanity light and waterfall faucet in bathroom. Also, new industrial vinyl tile flooring throughout. Still being put together but it's finally coming along.
Austen,
If you really want it to be zoomy, Look Up the system that Keith Vaselakes has built.
His system does everything it should and everything you want and is real clean.
Good luck at finding a 23, they were only 11% of the build and still are about that. Those that have them tend to want to keep them.
Matt
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|
|
|
|
| Re: Accessory Grounding???? [message #332438 is a reply to message #332436] |
Wed, 23 May 2018 08:15 |
|
Matt Colie
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
|
Senior Member |
|
|
DrMeznik wrote on Wed, 23 May 2018 08:56I figured it'd be tough to find a 23 footer in decent shape. I am probably going to build out an old t1n Sprinter Van and wait for the perfect one to come up for sale. Might take a few years. I do really like these things. The one I bought was in a little worse shape than I would buy again. Live and learn. Probably going to lose money selling this thing. But, at least the new owners will get a rig that has been completely gone over and an honest seller.
But, I think just looking around. That if you're spending less than $15k on a rig, it's going to have some issues. And if you spend less than 10k (like I did) it's a whole mess of problems.
Austen,
I am glad to see that you are not a dreamer as far as the Cost/Value relationship.
We have a standard line here....
A reliable and ready to travel coach will cost 30k$... All at once or as a kit....
What this does not say is that sweat is included at a shop rate.
If you want a 23, set book marks at all the individual chapter "For Sale" places and run that search religiously. They show up here too, but be ready to jump, because you are not the only one looking and when an known good coach shows up, it is usually at a good price and is not on the board for very long.
Good Luck
Matt
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|
|
|
|
| Re: [GMCnet] Accessory Grounding???? [message #332446 is a reply to message #332436] |
Wed, 23 May 2018 10:24 |
Mike Kelley
Messages: 467
Registered: February 2017
Karma: -2
|
Senior Member |
|
|
Austinm60:
You would have to be very careful and scrutinizing to get a good, safe, and reliable coach for 15k let alone money spent just
personalizing it.
The rule of thumb is 25 to 30k for a good, safe, and reliable coach - then spend what you want in personalizing it to your tastes.
Ask me how I know!
Bought 5 coaches in 5 years - 4 road ready (or so they said) and one project. 3 - 26's, 1 - 23', and 1 - 28' (2' stretch at rear). Still spending on the project coach (26'), but headed towards the upper limit of "rule of thumb".
My experience says the "rule of thumb" guys really know their stuff!
Mike/The Corvair a holic
But not a GMC a holic - don't have 13 of them yet!
Sent from my iPhone
> On May 23, 2018, at 7:56 AM, austenm606@gmail.com wrote:
>
> I figured it'd be tough to find a 23 footer in decent shape. I am probably going to build out an old t1n Sprinter Van and wait for the perfect one to
> come up for sale. Might take a few years. I do really like these things. The one I bought was in a little worse shape than I would buy again. Live and
> learn. Probably going to lose money selling this thing. But, at least the new owners will get a rig that has been completely gone over and an honest
> seller.
>
> But, I think just looking around. That if you're spending less than $15k on a rig, it's going to have some issues. And if you spend less than 10k
> (like I did) it's a whole mess of problems.
> --
> 1978 Royale,
>
> 26 Foot,
>
> 403 Engine,
>
> Quadrabags,
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
|
|
| Re: Accessory Grounding???? [message #332573 is a reply to message #332419] |
Fri, 25 May 2018 20:41 |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
Given the failure rate of the 5 cyl Merc Sprinter, I don't think you can run fast enough to catch me to give me one. My electrician is on the third engine - supplied free by Mercedes. He said the first one took a couple weeks for the dealer to get the engine in, but the next two times they had a stock of them and turned the truck in a day and a half. The 6cyl seems to be a better choice for longevity.
--johnny
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
Goto Forum:
Current Time: Tue Oct 01 19:39:09 CDT 2024
Total time taken to generate the page: 0.01620 seconds
|
GMCforum
Search
Help
Register
Login
Home
