GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » fridge venting/baffles
fridge venting/baffles [message #331233] Sun, 22 April 2018 12:58 Go to previous message
kstockwell is currently offline  kstockwell   United States
Messages: 367
Registered: May 2016
Location: Putney VT
Karma:
Senior Member
my fridge is no where near vented per these instructions.

I have a side vent and a top vent, and there are no baffles directing the airflow; there's a big gaping opening at the top below the vent, no side baffles.
It's like it's hanging in space. I've had trouble cooling it on LP this year; was going to change the burner but now it looks like it's burning bright blue, no flicker. I'll try to get the pressure checked to make sure it's at 11. What are the ramifications of no baffles? Is it just poor cooling in hot weather?

http://thenorcoldguy.com/norcold-technical-support-blog/norcold-refrigerator-ventilation-how-important-is-the-venting/
http://dave78chieftain.com/vent.html

I'm setup like this
http://dave78chieftain.com/RVCoolingUnit/Badvent1.gif

Does everyone else's fridge have the right baffles? Is this a Norcold specific thing? I did tape off the top vent, it's lower than they should be and I assumed it was not creating the chimney effect. Last year (and i think previous years/owners based on the remote temp sensor that was installed) it just had to be set all the way cold to work and didn't work as well when it was hot.

Two weekends ago when it wasn't hot out the freezer let my ice cream sandwiches get soft. It works fine on electric. If that's the case does that mean I don't have to worry about the baffles as much and just focus on the LP pressure?

thanks, haven't asked any questions in awhile

kelly


1978 Kingsley Putney VT

[Updated on: Sun, 22 April 2018 12:59]

Report message to a moderator

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Tid Bit. Getting a wire fed in tight small places.
Next Topic: chevy tracker parts
Goto Forum:
  


Current Time: Thu Sep 19 10:34:31 CDT 2024

Total time taken to generate the page: 0.01164 seconds