Home » Public Forums » GMCnet » [GMCnet] The engine water pump to get, CARDONE Select 55-21118H
| [GMCnet] The engine water pump to get, CARDONE Select 55-21118H [message #330888] |
Fri, 13 April 2018 12:50  |
Thomas Pryor
Messages: 143
Registered: January 2011
Karma: 1
|
Senior Member |
|
|
Mark S wrote:
So does anyone know if there are other pumps that meet the Roller/ball
bearing requirement besides the Cardone Select?
The Tuff Stuff pumps were mentioned... What about Flow Kooler? Any others?
------------------------------------------------------------------------------------------------------------------------------------------------------ -----------------------------------------
I talked with Both Tuff Stuff and Flow Kooler. Tuff Stuff would not
divulge the Bearing Part number so its not verified...........Flow Kooler
is just not interested!
As far as I can discover, these are the only folks making new pumps with
new entrails, Eh?
--
Regards,
Tom Pryor
4188 Limerick Dr
Lake Wales, Fl 33859
Cell 248 470 9186
Living on a waterfront is not a matter of life or death. Its more
important than that.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] The engine water pump to get, CARDONE Select 55-21118H [message #330889 is a reply to message #330888] |
Fri, 13 April 2018 13:07  |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
On Fri, Apr 13, 2018 at 10:50 AM Thomas Pryor wrote:
> Mark S wrote:
>
> So does anyone know if there are other pumps that meet the Roller/ball
> bearing requirement besides the Cardone Select?
>
> The Tuff Stuff pumps were mentioned... What about Flow Kooler? Any others?
>
> ------------------------------------------------------------------------------------------------------------------------------------------------------ -----------------------------------------
>
>
> I talked with Both Tuff Stuff and Flow Kooler. Tuff Stuff would not
> divulge the Bearing Part number so its not verified...........Flow Kooler
> is just not interested!
>
> As far as I can discover, these are the only folks making new pumps with
> new entrails, Eh?
> --
> Regards,
>
> Tom Pryor
> 4188 Limerick Dr
> Lake Wales, Fl 33859
> Cell 248 470 9186
>
> Living on a waterfront is not a matter of life or death. Its more
> important than that.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] The engine water pump to get, CARDONE Select 55-21118H [message #330892 is a reply to message #330889] |
Fri, 13 April 2018 16:32 |
Kingsley Coach
Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada
Karma: -34
|
Senior Member |
|
|
Tom
What's with the Eh stuff?? :)
You got a Canuck connection?
Mike in NS
Virus-free.
www.avast.com
On Fri, Apr 13, 2018 at 3:07 PM, Jim Kanomata wrote:
> On Fri, Apr 13, 2018 at 10:50 AM Thomas Pryor wrote:
>
>> Mark S wrote:
>>
>> So does anyone know if there are other pumps that meet the Roller/ball
>> bearing requirement besides the Cardone Select?
>>
>> The Tuff Stuff pumps were mentioned... What about Flow Kooler? Any
> others?
>>
>> ------------------------------------------------------------
> ------------------------------------------------------------
> -----------------------------------------------------------------------
>>
>>
>> I talked with Both Tuff Stuff and Flow Kooler. Tuff Stuff would not
>> divulge the Bearing Part number so its not verified...........Flow Kooler
>> is just not interested!
>>
>> As far as I can discover, these are the only folks making new pumps with
>> new entrails, Eh?
>> --
>> Regards,
>>
>> Tom Pryor
>> 4188 Limerick Dr
>> Lake Wales, Fl 33859
>> Cell 248 470 9186
>>
>> Living on a waterfront is not a matter of life or death. Its more
>> important than that.
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> --
> Jim Kanomata
> Applied/GMC, Newark,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS
Life is too short to hold a grudge; slash some tires and call it even !
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] The engine water pump to get, CARDONE Select 55-21118H [message #330907 is a reply to message #330888] |
Sat, 14 April 2018 00:42 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
Tom,
I really want to thank you for finding that pump and spreading the information. From what I read here it definitely is the item to use for any future pump replacements on both the 403 and 455. The roller bearing and the full size impeller (4.25") are the real differences of importance to me.
Ken B.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: [GMCnet] The engine water pump to get, CARDONE Select 55-21118H [message #330966 is a reply to message #330888] |
Sun, 15 April 2018 04:54 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
Thomas Pryor wrote on Fri, 13 April 2018 12:50Mark S wrote:
So does anyone know if there are other pumps that meet the Roller/ball
bearing requirement besides the Cardone Select?
The Tuff Stuff pumps were mentioned... What about Flow Kooler? Any others?
I talked with Both Tuff Stuff and Flow Kooler. Tuff Stuff would not
divulge the Bearing Part number so its not verified...........Flow Kooler
is just not interested!
As far as I can discover, these are the only folks making new pumps with
new entrails, Eh?
--
Regards,
Tom Pryor
4188 Limerick Dr
Lake Wales, Fl 33859
Cell 248 470 9186
Living on a waterfront is not a matter of life or death. Its more
important than that.
Well I did a lot of searching and found the following cross reference. All of these numbers a
"appear" to be the Heavy Duty variety that you want with numbers mostly ending in H or HD. There were 85 pages of vehicles that it fit and most said w/AC and heavy duty cooling. That said, I did look up the Auto Zone one and it was available by mail only. I do not want to research this any more.
If I am going to get one by mail I would order it from Jim K at Applied GMC. The price would be about the same or cheaper, and you know that you will get the correct item the first time. There is nothing wrong with Cardone Products which is what I believe he is selling.
Here is the List:
Brands: ADVANCE, ADVANCE/CARQUEST WATER PUMPS, ADVANCE/DRIVEWORKS, AIRTEX AUTOMOTIVE DIVISION, ALL PRO/FMI, ASC INDUSTRIES, ASC INDUSTRIES (FRENCH), ASC INDUSTRIES (SPANISH), AUTOZONE/ DURALAST-ASC, AUTOZONE/BOSCH, AUTOZONE/CARDONE, BOSCH, CARDONE/CARDONE SELECT, CARQUEST, CARQUEST/CARQUEST WATER PUMPS, CARQUEST/DRIVEWORKS, CARQUEST/GMB, FMI WATER PUMPS, HYTEC AUTOMOTIVE, MASTER PRO SELECT WATER PUMP, MURRAY TEMPERATURE CONTROL, NOVAPACIFIC, PARTS MASTER/ASC, PARTS MASTER/FMI, PARTS PLUS NEW WATER PUMPS, UNI-SELECT CAN/PRO SERIES WATER PUMPS, US MOTOR WORKS
Part Numbers: 20039H, 3-455HD, 347014, 51-2164, 55-21118H, 58-295H, 58-297H, 98033, AW1120H, CP1120H, CWP-455HD, NP021120H, PWP-455HD, T3086, US1120H, WP-455HD
Good Luck
Ken B.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: [GMCnet] The engine water pump to get, CARDONE Select 55-21118H [message #331002 is a reply to message #330966] |
Sun, 15 April 2018 22:27 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Tom P confronted the pump Mfg to find out where they squire the bearing.
Some would not say, others using US made ones informed Tom .
Sent from my iPhone
> On Apr 15, 2018, at 2:54 AM, Ken Burton wrote:
>
> Thomas Pryor wrote on Fri, 13 April 2018 12:50
>> Mark S wrote:
>>
>> So does anyone know if there are other pumps that meet the Roller/ball
>> bearing requirement besides the Cardone Select?
>>
>> The Tuff Stuff pumps were mentioned... What about Flow Kooler? Any others?
>>
>>
>> I talked with Both Tuff Stuff and Flow Kooler. Tuff Stuff would not
>> divulge the Bearing Part number so its not verified...........Flow Kooler
>> is just not interested!
>>
>> As far as I can discover, these are the only folks making new pumps with
>> new entrails, Eh?
>> --
>> Regards,
>>
>> Tom Pryor
>> 4188 Limerick Dr
>> Lake Wales, Fl 33859
>> Cell 248 470 9186
>>
>> Living on a waterfront is not a matter of life or death. Its more
>> important than that.
>
>
>
> Well I did a lot of searching and found the following cross reference. All of these numbers a
> "appear" to be the Heavy Duty variety that you want with numbers mostly ending in H or HD. There were 85 pages of vehicles that it fit and most said
> w/AC and heavy duty cooling. That said, I did look up the Auto Zone one and it was available by mail only. I do not want to research this any more.
>
>
> If I am going to get one by mail I would order it from Jim K at Applied GMC. The price would be about the same or cheaper, and you know that you will
> get the correct item the first time. There is nothing wrong with Cardone Products which is what I believe he is selling.
>
> Here is the List:
>
> Brands: ADVANCE, ADVANCE/CARQUEST WATER PUMPS, ADVANCE/DRIVEWORKS, AIRTEX AUTOMOTIVE DIVISION, ALL PRO/FMI, ASC INDUSTRIES, ASC INDUSTRIES (FRENCH),
> ASC INDUSTRIES (SPANISH), AUTOZONE/ DURALAST-ASC, AUTOZONE/BOSCH, AUTOZONE/CARDONE, BOSCH, CARDONE/CARDONE SELECT, CARQUEST, CARQUEST/CARQUEST WATER
> PUMPS, CARQUEST/DRIVEWORKS, CARQUEST/GMB, FMI WATER PUMPS, HYTEC AUTOMOTIVE, MASTER PRO SELECT WATER PUMP, MURRAY TEMPERATURE CONTROL, NOVAPACIFIC,
> PARTS MASTER/ASC, PARTS MASTER/FMI, PARTS PLUS NEW WATER PUMPS, UNI-SELECT CAN/PRO SERIES WATER PUMPS, US MOTOR WORKS
>
> Part Numbers: 20039H, 3-455HD, 347014, 51-2164, 55-21118H, 58-295H, 58-297H, 98033, AW1120H, CP1120H, CWP-455HD, NP021120H, PWP-455HD, T3086, US1120H,
> WP-455HD
>
> Good Luck
>
> Ken B.
>
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] The engine water pump to get, CARDONE Select 55-21118H [message #331004 is a reply to message #331002] |
Sun, 15 April 2018 22:52 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
Jim,
My point was that Tom has already done the research and posted it here. You are already stocking and selling them at a reasonable price. Why bother researching it any more. I did supply the cross reference that I found on the Internet with the information he wanted.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: [GMCnet] The engine water pump to get, CARDONE Select 55-21118H [message #331019 is a reply to message #331004] |
Mon, 16 April 2018 12:08 |
TR 1
Messages: 348
Registered: August 2015
Location: DFW
Karma: -7
|
Senior Member |
|
|
Ken Burton wrote on Sun, 15 April 2018 22:52
My point was that Tom has already done the research and posted it here. You are already stocking and selling them at a reasonable price. Why bother researching it any more.
Easy. Because I already have a flow kooler pump on my coach that I am happy with, and I'd like to know if it would be prudent to replace it when I install the new fan setup. I asked about other pumps in case someone else is in the same boat with another brand pump....
Mark S. '73 Painted Desert,
Manny 1 Ton Front End,
Howell Injection,
Leigh Harrison 4bag and Rear Brakes,
Fort Worth, TX
|
|
|
|
| Re: [GMCnet] The engine water pump to get, CARDONE Select 55-21118H [message #331024 is a reply to message #330888] |
Mon, 16 April 2018 12:40 |
TR 1
Messages: 348
Registered: August 2015
Location: DFW
Karma: -7
|
Senior Member |
|
|
BTW, I sat on hold myself with flow kooler customer service, and they finally said they would find out and get back to me. When they did, the girl told me it was a "roller/ball bearing". When I asked her to clarify, she basically said that was the best she could find out.
Researching further, at least in flow kooler's case, their business model is to buy a "quality" pump (whatever that means) then replace the supplied impeller with their own impeller. The flow kooler pump I have was stamped GMB. I'll try GMB to see if they have any info on the bearings.
Mark S. '73 Painted Desert,
Manny 1 Ton Front End,
Howell Injection,
Leigh Harrison 4bag and Rear Brakes,
Fort Worth, TX
|
|
|
|
|
|
| Re: [GMCnet] The engine water pump to get, CARDONE Select 55-21118H [message #331033 is a reply to message #331032] |
Mon, 16 April 2018 18:59 |
TR 1
Messages: 348
Registered: August 2015
Location: DFW
Karma: -7
|
Senior Member |
|
|
Matt Colie wrote on Mon, 16 April 2018 18:13Mark,
If you are not going to tear into the cooling system or FEAD, leave it alone until you feel like it.
If you can get a macro of the end of the pump shaft, it might have the bearing maker's part number. If it does, that may tell us.
I bought the Cardone pump because it was real convenient to change now. The rest of the engine is in little boxes and neat piles in my barn so changing a water pump is just not an issue.
Matt
Thanks for the advice, Matt and good idea on the macro. Going to give that a shot when I install the fan.
Mark S. '73 Painted Desert,
Manny 1 Ton Front End,
Howell Injection,
Leigh Harrison 4bag and Rear Brakes,
Fort Worth, TX
|
|
|
|
| Re: [GMCnet] The engine water pump to get, CARDONE Select 55-21118H [message #340219 is a reply to message #331033] |
Mon, 21 January 2019 12:13 |
Bill Van Vlack
Messages: 419
Registered: September 2015
Location: Guemes Island, Washington
Karma: 14
|
Senior Member |
|
|
Resurrecting this thread from last Spring.....
I have not been able to find the Cardone Select 55-21118H water pump in stock from any supplier. Cardone customer service tells me that they won't make any more until they get cores, but when I spoke to their R&R department I found out that they can rebuild my existing water pump to the 55-21118H specs if I tell them (or NAPA) to have it rebuilt to 58-297-H specs, which consists of a gasket and the roller/ball bearings.
Does this make sense to the water pump experts out there?
Bill Van Vlack
'76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath, Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o mid November 2015.
|
|
|
|
| Re: [GMCnet] The engine water pump to get, CARDONE Select 55-21118H [message #340227 is a reply to message #340219] |
Mon, 21 January 2019 13:35 |
James Hupy
Messages: 6806
Registered: May 2010
Karma: -62
|
Senior Member |
|
|
Bill, if you have a Baxter's Auto parts near you, they can fix you up.
Jim Hupy
On Mon, Jan 21, 2019, 10:14 AM Bill Van Vlack Resurrecting this thread from last Spring.....[/color]
>
> I have not been able to find the Cardone Select 55-21118H water pump in
> stock from any supplier. Cardone customer service tells me that they won't
> make any more until they get cores, but when I spoke to their R&R
> department I found out that they can rebuild my existing water pump to the
> 55-21118H
> specs if I tell them (or NAPA) to have it rebuilt to 58-297-H specs, which
> consists of a gasket and the roller/ball bearings.
>
> Does this make sense to the water pump experts out there?
> --
> Bill Van Vlack
> '76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath,
> Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o
> mid
> November 2015.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] The engine water pump to get, CARDONE Select 55-21118H [message #340228 is a reply to message #340219] |
Mon, 21 January 2019 13:49 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
Bill Van Vlack wrote on Mon, 21 January 2019 12:13Resurrecting this thread from last Spring.....
I have not been able to find the Cardone Select 55-21118H water pump in stock from any supplier. Cardone customer service tells me that they won't make any more until they get cores, but when I spoke to their R&R department I found out that they can rebuild my existing water pump to the 55-21118H specs if I tell them (or NAPA) to have it rebuilt to 58-297-H specs, which consists of a gasket and the roller/ball bearings.
Does this make sense to the water pump experts out there?
Yes and no. There are several differences in the cores out there and so that spec may or may not work depending on your core.
On the Cardone 55-21118H pump, it is a NEW pump, (not a rebuilt) and as such does not use an old core for parts. That does not help you much because Cardome does not appear to be making them right now. Every place I tried online says they are out of stock EXCEPT Pep Boys. So you might want to try them:
https://www.pepboys.com/cardone-select-new-water-pump/product/20027460
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: [GMCnet] The engine water pump to get, CARDONE Select 55-21118H [message #340232 is a reply to message #340228] |
Mon, 21 January 2019 16:05 |
Dolph Santorine
Messages: 1236
Registered: April 2011
Location: Wheeling, WV
Karma: -41
|
Senior Member |
|
|
I ordered one for a spare on 20 December from Summit.
They are allegedly shipping on 2/4
Dolph
DE AD0LF
Wheeling, West Virginia
1977 26’ ex-PalmBeach
Howell EFI & EBL, Reaction Arms, Sullybilt Bags, Manny Transmission
“The Aluminum and Fiberglass Mistress"
> On Jan 21, 2019, at 2:49 PM, Ken Burton wrote:
>
> Bill Van Vlack wrote on Mon, 21 January 2019 12:13
>> Resurrecting this thread from last Spring.....
>>
>> I have not been able to find the Cardone Select 55-21118H water pump in stock from any supplier. Cardone customer service tells me that they won't
>> make any more until they get cores, but when I spoke to their R&R department I found out that they can rebuild my existing water pump to the
>> 55-21118H specs if I tell them (or NAPA) to have it rebuilt to 58-297-H specs, which consists of a gasket and the roller/ball bearings.
>>
>> Does this make sense to the water pump experts out there?
>
> Yes and no. There are several differences in the cores out there and so that spec may or may not work depending on your core.
>
> On the Cardone 55-21118H pump, it is a NEW pump, (not a rebuilt) and as such does not use an old core for parts. That does not help you much because
> Cardome does not appear to be making them right now. Every place I tried online says they are out of stock EXCEPT Pep Boys. So you might want to try
> them:
> https://www.pepboys.com/cardone-select-new-water-pump/product/20027460
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] The engine water pump to get, CARDONE Select 55-21118H [message #340233 is a reply to message #330888] |
Mon, 21 January 2019 16:27 |
lqqkatjon
Messages: 2324
Registered: October 2010
Location: St. Cloud, MN
Karma: 5
|
Senior Member |
|
|
When I ordered mine from Summit the first part of August 2018. it showed it to be out of stock and would ship in like 2 weeks. shortly after that the date switched out to mid sept. then it dropped back a few weeks, and I finally did receive mine at the end of August the week before I installed it.
Dolph will have to let us know if his waterpump shows up.
When I was looking, I had hoped for this A-1 Cardone pump, and I was really happy with it when it showed up. Seemed like a solid looking pump, ect... I was ready to pull the trigger on a milodon aluminum pump when it looked like the a-1 was not going to show up in time, at 3x the cost. even though some of the others out there probably would work just fine, I still did not like the looks of the rebuilt one's from o'reilies and autozone.
Jon Roche
75 palm beach
EBL EFI, manny headers, Micro Level, rebuilt most of coach now.
St. Cloud, MN
http://lqqkatjon.blogspot.com/
[Updated on: Mon, 21 January 2019 16:27] Report message to a moderator |
|
|
|
| Re: [GMCnet] The engine water pump to get, CARDONE Select 55-21118H [message #340240 is a reply to message #340233] |
Mon, 21 January 2019 21:32 |
Rollerg
Messages: 111
Registered: November 2014
Location: Marysville, MI
Karma: 0
|
Senior Member |
|
|
I also ordered one a couple weeks ago from Summit. Scheduled to arrive 2/5.
Gary Coaster / Reno, NV
1977 GMC Eleganza ll
GMC RV Day Night Shade Sales
GMCShades@gmail.com
www.GMCMotorhomemarketplace.com/GMC_Shades/
> On Jan 21, 2019, at 2:27 PM, Jon Roche wrote:
>
> When I ordered mine from Summit the first part of August 2018. it showed it to be out of stock and would ship in like 2 weeks. shortly after that
> the date switched out to mid sept. then it dropped back a few weeks, and I finally did receive mine at the end of August the week before I installed
> it.
>
> Dolph will have to let us know if his waterpump shows up.
>
>
> When I was looking, I had hoped for this A-1 Cardone pump, and I was really happy with it when it showed up. Seemed like a solid looking pump,
> ect... I was ready to pull the trigger on a milodon aluminum pump, at 3x the cost. even though some of the others out there probably would work
> just fine, I still did not like the looks of the rebuilt one's from o'reilies and autozone.
>
>
> --
> Jon Roche
> 75 palm beach
> St. Cloud, MN
> http://lqqkatjon.blogspot.com/
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] The engine water pump to get, CARDONE Select 55-21118H [message #340248 is a reply to message #340240] |
Tue, 22 January 2019 10:55 |
Bill Van Vlack
Messages: 419
Registered: September 2015
Location: Guemes Island, Washington
Karma: 14
|
Senior Member |
|
|
In my search, I've discovered...
- Baxter can't find the Cardone Pump part number in their database.
- Pep Boys does not actually have them in stock, once you call a store.
- Summit shows 2/4 availability, but by phone does not know when they'll receive them to ship.
- Cardone does not know when they'll receive them to ship, suggested I call a dealer to see if they have one in stock.
- Advance, one of Cardone's dealers, told me via Customer Assistance that Carquest (now owned by Advance) sells this pump under part number #T3086 and that they take it out of the Cardone box and put it into a Carquest box.
- A local Carquest store found two in stock at their Portland warehouse and has ordered one for me. $44.98.
- Once it comes it, I need to verify that it's really the Cardone pump. Any suggestions?
Bill Van Vlack
'76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath, Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o mid November 2015.
[Updated on: Tue, 22 January 2019 10:56] Report message to a moderator |
|
|
|
| Re: [GMCnet] The engine water pump to get, CARDONE Select 55-21118H [message #340255 is a reply to message #340240] |
Tue, 22 January 2019 12:58 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
I believe with Pep Boys you order online and ship it to the store. For a low volume item like this it would cost them a fortune to keep one in stock at every store.
What do I know. I never ordered one from them. I just saw that they said they had it in stock where Rock Auto and Summit had it on back order.
Did anyone ever think to call Jim K. at Applied? He was stocking it unless he is currently sold out.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: [GMCnet] The engine water pump to get, CARDONE Select 55-21118H [message #340271 is a reply to message #340248] |
Tue, 22 January 2019 17:14 |
Ethan James
Messages: 32
Registered: October 2016
Location: Roanoke, VA
Karma: 1
|
Member |
|
|
I have one of the carquest ones new in the box, but I can't see anything
that indicates it was build by cardone, anyway to check?
--
Ethan James
'76 Glenbrook "Roise"
Roanoke, VA
On Tue, Jan 22, 2019 at 12:07 PM Bill Van Vlack
wrote:
> In my search, I've discovered...
> - Baxter can't find the Cardone Pump part number in their database.
> - Pep Boys does not actually have them in stock, once you call a store.
> - Summit shows 2/4 availability, but by phone does not know when they'll
> receive them to ship.
> - Cardone does not know when they'll receive them to ship, suggested I
> call a dealer to see if they have one in stock.
> - Advance, one of Cardone's dealers, told me via Customer Assistance
> that Carquest (now owned by Advance) sells this pump under part number
> #T3086
> and that they take it out of the Cardone box and put it into a Caquest box.
> - A local Carquest store found two in stock at their Portland warehouse
> and has ordered one for me. $44.98.
> - Once it comes it, I need to verify that it's really the Cardone pump.
> Any suggestions?
>
> --
> Bill Van Vlack
> '76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath,
> Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o
> mid
> November 2015.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
Goto Forum:
Current Time: Sat Nov 16 09:29:39 CST 2024
Total time taken to generate the page: 0.01138 seconds
|
GMCforum
Search
Help
Register
Login
Home
